Harman-Kardon AVR 630 Technical Specifications, Audio Section, FM Tuner Section, AM Tuner Section

Page 53
Technical Specifications

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

90 Watts per channel, 20Hz–20kHz,

@ < 0.07% THD, both channels driven into 8 ohms

5/7 Channel Surround Modes

Power Per Individual Channel

Front L&R channels:

75 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

75 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, L & R Back) channels: 75 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High Level)

200mV/47kohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz– 130kHz

High Instantaneous

 

Current Capability (HCC)

±50 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec**

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo: 70/68dB (DIN)

Distortion

Mono/Stereo: 0.15/0.2%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz: 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

Frequency Range

520–1710kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop: 500µV

Distortion

1kHz, 50% Mod: 0.8%

Selectivity

±10kHz: 30dB

Video Section

 

Video Format

PAL/NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency Response

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

Video Frequency

 

Response (Component)

10Hz-50MHz (-3dB)

General

 

Power Requirement

AC 220-240V/50Hz

Power Consumption

59W idle, 1040W maximum

 

(7 channels driven)

Dimensions (Max)

 

Width

440mm

Height

165mm

Depth

435mm

Weight

18.6 kg

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated.

Audio SectionFM Tuner SectionAM Tuner SectionVideo SectionGeneralManual backgroundManual backgroundManual backgroundManual background TM is a trademark of Harman International Industries, Inc. (Patent No. 5,386,478).

*Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” “Pro Logic II” and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround, DTS-ES and DTS Neo:6 are trademarks of Digital Theater Systems, Inc.

VMAx is a trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Harman International Industries, Incorporated.

HDCD is a registered trademark of Pacific Microsonics, Inc.

A-BUS and A-BUS Ready are registered trademarks of Leisure Tech Electronics Pty Ltd Australia.

**Without input anti slewing and output isolation networks.

TECHNICAL SPECIFICATIONS 53

Image 53
Contents AVR 630 Audio/ Video Receiver Declaration of Conformity Table of ContentsWe, Harman Consumer International 2, route de Tours 72500 Château-du-Loir FRANCEIntroduction Description and FeaturesMultiple digital inputs and outputs On-screenmenu and display systemImportant Safety Information Introduction / Safety Information4INTRODUCTION / SAFETY INFORMATION Handle the AC Power Cord Gently2 System Power Control 1 Main Power Switch3 Power Indicator Tuning Selector33 for more information Coaxial ÓFront Panel Controls 6FRONT PANEL CONTROLSDigital Audio Outputs Connect these Rear Panel ConnectionsSwitched Outlet Unswitched OutletAC Power Cord Jack Connect the AC Rear Panel Connections+ and negative -terminals AVR 630 when appropriate upgrades are availableRear Panel Connections REAR PANEL CONNECTIONSH I D C E G F P P P Main Remote Control Functions1 0 MAIN REMOTE CONTROL FUNCTIONS Main Remote Control Functions8-ChannelDirect Inputs the input GDigital Select Press this button to assignDTS Neo 6 MUSIC DTS Neo 6 MOVIES 12MAIN REMOTE CONTROL FUNCTIONSMain Remote Control Functions MAIN REMOTE CONTROL FUNCTIONS Main Remote Control Functions14ZONE II REMOTE CONTROL FUNCTIONS Zone II Remote Control FunctionsINSTALLATION AND CONNECTIONS Installation and ConnectionsAudio Equipment Connections Video Equipment Connections16INSTALLATION AND CONNECTIONS Important Notes for S-VideoconnectionsSCART A/V Connections Video Audio InputsIf you use a unit providing RGB signals on a Note for RGB signal with SCARTImportant Note for the Use of SCART-CinchAdapters Installation and ConnectionsMain Room Remote Control Extension System and Power ConnectionsRS-232Connections AC Power ConnectionsSpeaker Selection Speaker PlacementBThe distance between the left and right Installation and ConnectionsUsing the On-ScreenDisplay System ConfigurationSystem Setup Input SetupComponent Video Inputs may be SYSTEM CONFIGURATIONSet Button F System Configuration22SYSTEM CONFIGURATION Audio SetupSpeaker Setup Fto bring up the SPEAKER SETUP menu FigureSYSTEM CONFIGURATION System ConfigurationSystem Configuration Surround SetupButton Eso that SURROUND Adjustments for Other Inputspresss the Set Button F System ConfigurationNight Mode Settings Delay Settings26SYSTEM CONFIGURATION individually for each input in useOutput Level Adjustment setting, then press Set Fto confirm the set- tingUsing EzSet 3.Press and hold the SPL Select ButtonEon the remote 28SYSTEM CONFIGURATION1.Press and hold the SPL Select Button press the Clear ButtonFEATURES Surround Mode ChartOperation MODEFEATURES Surround Mode ChartOperation MODEUsing the Sleep Timer Switched AC Outlets and the Power8-ChannelDirect Inputs and when the Basic OperationVolume Up/Down Controls and Use of HeadphonesOne of the most important features of the Surround Mode SelectionDolby Digital Digital Audio Playbackrear panel or front panel *ÓSpeaker/Channel Indicators Digital Bitstream Indicators2.0audio, while the main feature is available in Selecting a Digital SourceFront Panel In/Outputs Tape RecordingNight Mode puts for Tape OutputsMemory Backup Output Level Adjustment With Source SignalsDim Function OperationTurn On Volume Level Advanced FeaturesADVANCED FEATURES Surround Amplifier Channel AssignmentSemi-OSDSettings Advanced Features / Multiroom OperationFull-OSDTime Out Adjustment Installationlocation volume Multiroom Setupfrequency Kè, change the tuner preset Multiroom OperationRecalling Preset Stations Preset TuningMultiroom Operation / Tuner Operation Basic Tuner OperationTuner Operation RDS TuningRDS Operation RDS Display OptionsProgramming the Remote Configuring the RemotePreprogrammed Code Entry FappearsProgramming the Remote Learning CommandsAutomatic Code Entry PROGRAMMING THE REMOTEProgramming the Remote Changing Devices44PROGRAMMING THE REMOTE Recording a Macro Macro ProgrammingProgramming the Remote PROGRAMMING THE REMOTEPower On VID 2/TV Power On VID 3/Cable Punch-ThroughConfigurationPower On AVR Logic 7 O Erasing a MacroNote for Volume Punch-Through Volume Punch-ThroughChannel Punch-Through red. Press the ⁄¤ Navigation ButtonsTransport Punch-Through EzSet Configuration⁄¤ Navigation Buttons Eonce so that 4. Within five seconds, press the Set ButtonRenaming a Device RenamingNotes on Renaming Devices ‹/› Navigation Buttons Eas requiredFigure Figure Resetting the Remote11.At this point you have two options Notes on Renaming KeysPROGRAMMING THE REMOTE Programming the RemoteT I M E O U T O R C L R K E Y P R E S S E D A V R L O W B A T T E R YProcessor Reset Troubleshooting GuideSYMPTOM SOLUTIONAudio Section Technical SpecificationsFM Tuner Section AM Tuner SectionPart No. ZKD0201HA00-4 Harman Consumer International