NOTE: Please read hard floor and carpet cleaning operating instructions prior to first use.
For most effective cleaning, follow the recommended operating sequence below,
IMPORTANT: For best cleaning results use a steady, forward and backward motion. Wet cleaning should be done at half the speed of dry vacuuming. For heavily soiled areas, repeat if necessary.
This product can be used to clean hard floor surfaces such as tile, linoleum, stone, vinyl, laminate, and wood
floors that have been sealed with a
polyurethane coating and can be cleaned with water.
To prevent damage to floors, follow the manufacturers cleaning
recommendations. Before using, ensure that surface is not worn, bare, or has separated joints. Do not use the cleaner if any of these conditions exist.
IMPORTANT: Make sure to use the tangerine hard floor nozzle and Kenmore ® Floor Cleaner Concentrate or Kenmore ®
Hardwood Floor Concentrate when operating as a hard floor cleaner. See
page 10 - 11 for instructions on changing nozzles.
8