Using Your Carpet Glider

Using Your Steam Mop - cont’d

fig. 12

5When one side of the micro-fiber cleaning pad gets dirty, just flip the mop and you can quickly start using the other side. (fig. 12)

6When the water tank is empty, the Steam Mop will stop producing steam. You can refill the water tank at any time as long as the mop is unplugged from the outlet. Follow the instructions from page 4. This applies to switching the mop heads or micro-fiber cleaning pad as well.

NOTE: Please wait 2-3 minutes for the Steam Mop to cool off before switching the mop head or the micro-fiber cleaning pad. Never leave the Steam Mop with a damp/ wet micro-fiber cleaning pad on any floor.

The Steam Mop will not clean your carpeting or area rugs. However, it is great for grooming and freshening.

fig. 13

THE CARPET GLIDER

1The Carpet Glider can be used with the All-Purpose Head to lightly steam your carpet and area rugs. Just place the mop head with micro-fiber cleaning pad attached into the glider. The recommended steam setting is SCRUB when using the Carpet Glider. (fig. 13)

fig. 14

2Move the Steam Mop back and forth across a section of the carpet.

(fig. 14)

TOLL FREE: 1-800-798-7398

S3901D_11_IB_E_110704_2.indd 8

11-07-04 11:07 AM