Shark manual S3901D11IBE1107042.indd 11-07-04 1107 AM

Using Your Removable Handheld Steamer with Flat Scrubber Tool

Cleaning Tip: The Flat Scrubber Tool is designed for cleaning a variety of surfaces and is exceptional on those that are large and flat including counter tops, table tops, walls mirrors, windows, stairs, shelves and other similar surfaces. Super absorbent micro-fiber bonnet loosens, lifts, and locks in dirt and grime while sanitizing at the same time.

fig. 25

fig. 24

fig. 23

1To attach the All-Purpose Scrubber Pad, place the pad exterior side down on a flat surface (lavender tab indicates the bottom of the pad) and insert the top of the Flat Scrubber Tool into the top portion of the pad and then pull the pad over each side of the back edge.

2Press the Flat Scrubber Tool onto the Accessory Hose until it clicks into place. (fig. 23)

3Press and hold the steam trigger to create steam. While the steam trigger button is pressed and held down, the ON/STANDBY button will be solid blue. When released, the ON/STANDBY button will return to flashing blue. (fig. 24)

4To remove the Flat Scrubber Tool, press and hold down the Accessory Hose release button. Then slide out the Flat Scrubber Tool. (fig. 25)

CAUTION: Do not press the steam trigger while attaching or removing the Flat Scrubber Tool.

CAUTION: Do not use the Flat Scrubber Tool without the All-Purpose Scrubber Pad attached.

www.sharkclean.com 13

S3901D_11_IB_E_110704_2.indd 13 11-07-04 11:07 AM