Care of Your Steam Mop, After USE and Storage

Care of Your Steam Mop

fig. 27

fig. 26

fig. 28

fig. 29

AFTER USE AND STORAGE

1When you have finished using the Handheld Steamer, reattach it to the mop by first placing the bottom of the Handheld Steamer into the cradle of the mop housing. (fig. 26)

2Then slide the top end of the Handheld Steamer into the mop housing and snap into place.

NOTE: Make sure all attachments are removed before reuniting the Handheld Steamer with the Steam Mop.

3If you are also done mopping, press the ON/STANDBY button until the LED light turns flashing blue. This stops the unit from steaming. Unplug the cord from the outlet and place the mop into the upright position. Let the unit cool for 2-3 minutes.

14	TOLL FREE: 1-800-798-7398

Remove the micro-fiber cleaning pad by releasing the quick fasteners and using the lavender loop on the side of the pocket, avoiding contact with the hot pad or dirt. (fig. 27)

4Empty the water tank before storage. Remove the water tank cap and empty the tank over a sink. Replace the water cap. (fig. 2 8)

5To store the Shark® Lift-Away™Pro Steam Pocket® Mop hanging up, first remove the head (after it has cooled and the steam has been released) then hang on a large hook. (fig. 29)

S3901D_11_IB_E_110704_2.indd 14

11-07-04 11:07 AM