Using Your Removable Handheld Steamer with Direct Steam Nozzle
Cleaning Tip: The Direct Steam Nozzle creates direct steam spray to clean and sanitize hard to reach nooks & crannies and other places where germs may build up. Use the Direct Steam Nozzle to loosen and dislodge compact dirt often found in corner and tight places where traditional methods and cleaning tools tend to push dirt into, making it tough to reach and clean. Spray direct steam and wipe clean with a wet cloth or paper towel.
fig. 17
fig. 16
FOR SPOT CLEANING AND
STEAMING
2First attach the Direct Steam Nozzle by pressing the nozzle onto the Handheld Steamer until it clicks into place. (fig. 16)
3Then press and hold the steam trigger button to start steaming. While the steam trigger button is pressed and held down, the ON/ STANDBY button will be solid blue. When released, the ON/STANDBY button will return to flashing blue. (fig. 17).
For effective cleaning, hold the steam output nozzle
10 | TOLL FREE: |
S3901D_11_IB_E_110704_2.indd 10
CAUTION: Do not press the steam trigger until the Direct Steam Nozzle is snapped into the main nozzle of your Handheld Steamer.
4To remove the Direct Steam Nozzle, press and hold down the Handheld Release Buttons. Then slide out the Direct Steam Nozzle using the grip.
CAUTION: Do not press the steam trigger while removing the Direct Steam Nozzle. Avoid touching the tip of the Direct Steam Nozzle, as this will be very hot after steaming.
NOTE: The Handheld Steamer may continue to emit steam for a few seconds after the trigger is released This is normal, and the steaming will eventually come to a stop.
