11.DO NOT unplug by pulling on power cord. To unplug, grasp the plug not the power cord. Do not use extension cords or outlets with inadequate current carrying capacity.
12.DO NOT put any objects into openings. Do not use with any opening that is blocked.
13.DO NOT put hands or feet under the steam mop. Unit gets very hot.
14.In mop mode use ONLY on flat, horizontal surfaces. Do not use on walls, counters or windows.
15.DO NOT use on leather, wax polished furniture or floors, synthetic fabrics, velvet or other delicate, steam sensitive materials.
16.DO NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance as this may damage the unit or make it unsafe for use. If you live in a hard water area, we recommend using distilled water in your steam mop.
17.When in use, NEVER turn the appliance over or on its side. NEVER DIRECT
STEAM TOWARDS PEOPLE, ANIMALS OR PLANTS.
18.NEVER LEAVE THE STEAM MOP IN ONE SPOT ON ANY SURFACE FOR ANY PERIOD OF TIME WHEN MICRO- FIBER PAD IS ATTACHED AS THIS WILL DAMAGE YOUR FLOORS.
19.Carefully remove the
20.When cleaning the steam mop, unplug the power cord from the electrical outlet and clean with a dry or damp cloth. Do not pour water or use alcohol, benzene or paint thinner on the unit.
21.Extreme caution should be exercised when using this appliance to clean stairs.
22.Never use steam mop without
23.Keep your work area well lit.
24.Store steam mop indoors in a cool, dry place.
25.To avoid circuit overload, do not operate another appliance on the same socket (circuit) as the steam cleaner.
26.If an extension cord is absolutely necessary, an extension cord rated a minimum of 15 ampere, 14 gage cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange cord so that it cannot be pulled or tripped over.
27Always unplug and allow the steam mop to cool before removing or changing mop heads.
WARNING: Your steam mop is designed to clean hard floor surfaces that will withstand high heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer.
SAVE THESE INSTRUCTIONS
| www.sharkclean.com |
S3901D_11_IB_E_110704_2.indd 3 |
|