Getting Started With Your Removable Handheld Steamer
Your Shark® Lift-Away™ Pro
Steam Pocket® Mop is designed to clean surfaces that will withstand high heat and moisture. Do not use on unsealed wood surfaces (especially wooden antique furniture), unglazed ceramic tile, painted surfaces or surfaces that have been treated with wax, oils, varnishes, or shellac. The sheen may be removed by the heat, steam, and friction of the cleaning tools. Lacquer and polyurethane coatings provide a hard durable protective finish that withstands moisture, but it is always recommended to test an isolated area of the surface to be cleaned before proceeding.
We also recommend you check the use and care instructions from the surface manufacturer.
When cleaning finished wood surfaces, use broad, continuous cleaning strokes. To prevent surface damage, avoid focusing steam or allowing the cleaning tools to sit in one spot for any amount of time.
NOTE: While the Shark®
is optimized for
fig. 15
IMPORTANT: Before removing the Handheld Steamer from the Steam Mop Housing, make sure that the unit is not actively steaming. The ON/STANDBY button should be flashing blue. If the ON/STANDBY button is solid blue, then press the button until it returns to flashing blue.
1To remove the Handheld Steamer, press and hold down the Handheld Release Buttons while pulling out the Handheld Steamer. (fig. 15)
www.sharkclean.com
9
S3901D_11_IB_E_110704_2.indd 9 |