Harman-Kardon AVR 3550HD Linear High-Level 200mV/47k ohms, 100dB, Distortion, 10Hz-8MHz -3dB

Page 68

AVR 3550HD TECHNICAL SPECIFICATIONS

Audio Section

Seven-Channel Surround Modes

Power per Individual Channel

Front L & R channels:

75 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

75 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, L & R Back) channels: 75 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Pro Logic® I/II

40dB

Dolby® Digital (AC-3)

55dB

DTS®

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz – 130kHz

High Instantaneous

 

Current Capability (HCC)

±35 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

Frequency Range

520–1720kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop 500µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±10kHz, 30dB

Video Section

 

 

Television Format

NTSC

 

Input Level/Impedance

1Vp-p/75 ohms

 

Output Level/Impedance

1Vp-p/75 ohms

 

Video Frequency Response

 

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

 

Video Frequency Response

 

 

(Component Video)

10Hz–100MHz (–3dB)

 

HDMI

Version 1.3a with 10-bit Deep Color

General

 

 

Power Requirement

AC 120V/60Hz

 

Power Consumption

118W idle, 890W maximum

 

 

(7 channels driven)

 

Dimensions

(Product)

(Shipping)

Width

17-5/16 inches (440mm)

21-7/8 inches (555mm)

Height

6-1/2 inches (165mm)

10-1/2 inches (266mm)

Depth

15 inches (382mm)

18-5/16 inches (465mm)

 

(Product)

(Shipping)

Weight

31.5 lb (14.3kg)

36.7 lb (16.7kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features, specifications and appearance are subject to change without notice.

Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. EzSet/EQ, Designed to Entertain and The Bridge II logo are trademarks of Harman International Industries, Incorporated.

iPod, iTunes and Apple are trademarks of Apple Inc., registered in the U.S. and other countries. iPod not included. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

A-BUS is a registered trademark of Leisure Tech Electronics Pty Ltd.

Audiovox is a registered trademark of Audiovox Corporation.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.

CEA is a registered trademark of the Consumer Electronics Association.

Cirrus Logic is a registered trademark of Cirrus Logic, Inc.

Dolby, the double-D symbol and Pro Logic are registered trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467 and other U.S. and worldwide patents issued and pending. DTS, DTS-ES and DTS Neo:6 are registered trademarks, and DTS 96/24, DTS-HD, DTS-HD High Resolution Audio and DTS-HD Master Audio are trademarks, of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

Faroudja DCDi Cinema is a trademark of Genesis Microchip Inc.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

SACD is a trademark of Sony Corporation.

TiVo is a registered trademark of TiVo Inc.

XM and XM Ready are registered trademarks of XM Satellite Radio.

Please register your AVR 3550HD at www.harmankardon.com. You’ll need the product’s serial number. At the same time, you can choose to be notified about new products and/or special promotions.

68

68

Image 68
Contents AVR 3550HD Safety Information Important Safety InstructionsImportant Safety Information Do not place the unit directly on a carpeted surfaceTable of Contents Introduction Harman Kardon AVR 3550HD 7.1-Channel Audio/Video ReceiverThank you for choosing a Harman Kardon product Audio SectionSupplied Accessories Audio InputsAudio/Video Inputs Digital Audio InputsFRONT-PANEL Controls Volume Knob Turn this knob to raise or lower the volume Power Indicator This LED has three possible modesOn When the AVR is turned on, this LED turns white REAR-PANEL Connections REAR-PANEL Connections REAR-PANEL Connections Main Remote Control Functions Main Remote Control Functions Main Remote Control Functions Zone 2 Remote Control Functions Zone 2 Remote Control Functions Introduction to Home Theater Surround ModesTypical Home Theater System Multichannel AudioConnecting Source Devices to the AVR ConnectionsSpeaker Connections SubwooferVideo Connections Digital VideoAnalog Video Hdmi cable runs are limited to about 10 feetRS-232 Serial Port FM antenna uses a 75-ohm F-connector. See FigureAntennas Speaker Placement Front Speaker PlacementPlacement of Surround Speakers in a 5.1-Channel System Placement of Surround Speakers in a 7.1-Channel SystemInstallation Step One Connect the SpeakersStep Two Connect the Subwoofer Step Three Connect the AntennasAudio Connections for non-HDMI sources Video Connections for non-HDMI sourcesChoose one digital audio connection Optical or Coaxial Hdmi Video Connect the player as shown in FigureConnect an Audio/Video Recorder PVD, DVR or TiVo Hdmi Video Connect the recorder as shown in FigureConnect an iPod Using Docking Station Connecting a Game Console, Camera or Other DeviceConnect a CD Player or Any Audio-Only Device Connect a Tape Deck or Any Audio-Only RecorderStep Six Plug in AC Power Step Five Connect the Video DisplaySatisfactory code set that operates most functions Step Seven Insert Batteries in RemoteEnter a code from , above Step Ten Install a Multizone System Optional LearningStep Eleven Turn On the AVR 3550HD Zone 2 Audio OutputsAVR Power On and Source Selectors Configure the AVR 3550HD Using EzSet/EQ Technology Initial SetupUsing the On-Screen Menu System Set Up Sources Select Cancel to return to the Speaker Setup menuHDMI-Equipped Multichannel Disc Player Audio and Video Input SelectionChannel Direct Inputs ‹ / › Buttons to delay the audio by up to 180ms. See Figure You are now ready to begin enjoying your new receiverOperation XM Radio Operation Using the TunerSource Selection Using Docking Station To store a channel in one of the 40 preset locationsPress the OK Button to store the new preset RecordingMusic Navigates the audio materials stored on the iPod Selecting a Surround ModePress the Menu Button to view the slide-out menu CH Stereo plays the left-channel signal through the front Auto SELECT, Surr VIRTUAL, Surr STEREO, Surr MOVIE, SurrAnalog Audio Signals Digital Audio SignalsAdvanced Functions Audio Processing and Surround SoundDolby Surround Settings Indicates that no surround information is presentManual Setup Step Three Manual Setup MenuNight Mode Step Two Measure Speaker DistancesNumber of Speakers Adjust Crossover Frequencies MenuSub Mode Step Four Setting Channel Output Levels Manually Adjust Speaker Distance MenuVideo Adjustments Tone Control Determines whether the treble and bassHow to Adjust the Custom Picture Settings Brightness AdjustmentNature For programs shot outdoors, in a natural setting Sports For sporting eventsMultizone Operation System Settings General AVR SettingsOperating the Multizone System Menu AppearanceAdvanced Remote Control Functions Resetting the RemotePunch-Through Programming Activities MacrosProcessor Reset MemoryTroubleshooting Guide Appendix Default settings, worksheets, remote product codes Table A2 Source Setting DefaultsAppendix Table A1 Recommended Source Component ConnectionsTable A3 Speaker/Channel Setting Defaults Table A4 Delay Setting DefaultsTable A7 Video Modes Settings Table A5 Source SettingsTable A6 Audio Effects Settings Table A8 Surround Modes Table A9 Remote Control CodesTable A10 System Settings Table A11 Zone 2 Settings Table A12 Surround ModesMode Group Enveloping sound field is desired Experience TunerMovie Back channel 0 or .1, EX Analog 2-channel Tuner Music adds a surround back channel Analog 2-channel TunerSurround Mode Description Incoming Bitstream or Signal Rate used on DVD-Video discsPerformance Via Hdmi DTS-ES Matrix DTS StereoAppropriate when a subwoofer is used Channel StereoChannels Tuner PCM 32kHz, 44.1kHz or 48kHz Channel Stereo Analog Bypass41 42 DMC1000 Table A13 Remote Control Function ListRadio Power Off Table A13Button Name GameAiwa Table A16 Remote Control Product Codes AUX-VCR Table A15 Remote Control Product Codes AUX-HDTVTable A14 Table A16Table A18 Remote Control Product Codes DVD Table A17Table A21 Remote Control Product Codes CBL Table A19 Remote Control Product Codes SATTable A20 Remote Control Product Codes Game Table A22 Remote Control Product Codes Table A23 Remote Control Product CodesTable A24 Remote Control Product Codes AUX- TiVo Table A21General Power Requirement AC 120V/60Hz Power Consumption Channels driven Dimensions Product Shipping WidthProduct Shipping Weight 31.5 lb 14.3kg 36.7 lb 16.7kg Linear High-Level 200mV/47k ohms