Harman-Kardon AVR 3550HD owner manual Main Remote Control Functions

Page 13

MAIN REMOTE CONTROL FUNCTIONS

The AVR 3550HD remote is capable of controlling 8 devices, including the AVR itself and an iPod docked in the included The Bridge II. During the installation process, you may program the codes for each of your source components into the remote. To operate a component, press its Selector button to change the device mode.

Each Source Selector has been preprogrammed to control certain types of components, with only the codes specific to each brand and model changing, depending on which product code is programmed. The AUX and CBL/SAT Source Selectors may be used for multiple device types, depending on the first digit of the product code. Other Source Selectors may be reassigned to other device types (see Initial Setup section).

AUX Source Selctor: CD player product codes begin with 0, 1 or

2.VCR codes begin with 3 or 4. HDTV set-top box codes begin with 6, PVD codes begin with 7 and TiVo® set-top box codes begin with 8.

CBL/SAT Source Selector: Cable set-top box codes begin with 0, 1 or 2, and satellite set-top box codes begin with 3 or 4.

IMPORTANT NOTE: All of the AVR 3550HD’s audio and video inputs are independently assignable. Select the inputs to which the device is physically connected during Initial setup. Any device may be connected to any compatible input and given any name (e.g., DVD or Game).

Most of the buttons on the remote have dedicated functions, although the precise codes transmitted vary depending on the device mode. Due to the wide variety of functions for various source devices, we have included only a few of the most-often used functions on the remote: alphanumeric keys, transport controls, television-channel control, menu access and power on and off.

Buttons dedicated to the AVR are available at any time, even in another device mode: AVR Power On and Off, Audio Effects, Video Modes, Surround Modes, Volume, Mute and Sleep Settings. Press the AVR Settings button near the bottom of the remote to return it to AVR mode.

A button’s function depends on which component is being controlled. See Table A13 in the appendix for listings of the functions for each type of component.

IR Transmitter Lens: As buttons are pressed on the remote, infrared codes are emitted through this lens.

AVR Power On Button: Press to turn on the AVR. The Master Power Switch on the rear panel must be on.

Device Power Off Button: Press a device’s Source Selector, then press this button to turn off the device.

Device Power On Button: Press a device’s Source Selector, then press this button to turn on the device.

Mute Button: Press to mute the AVR 3550HD’s speaker and head- phone outputs. To end the muting, press this button, adjust the volume, or turn off the receiver.

AVR Power Off Button: Press to turn off the AVR 3550HD.

Source Selectors: Press one of these buttons to select a source device, e.g., DVD, CD, cable TV, satellite or HDTV tuner. This will also turn on the receiver and switch the remote’s device mode to operate the source. The first press of the Radio Selector switches the AVR to the last-used tuner band (AM, FM or XM). Each successive press changes the band.

Audio Effects: Press to directly access the Audio Effects submenu, which allows adjustment of the AVR’s tone and other controls. Each additional press scrolls to the next line in the menu. See the Initial Setup section for more information.

Video Modes: Press for direct access to the Video Modes submenu, which contains picture settings to be used after you have adjusted the picture settings on the video display or TV. Each successive press scrolls to the next line in the menu. See the Advanced Functions section for more information.

Surround Modes: Press to directly access the Surround Modes submenu. Each successive press scrolls to the next line in the menu: Auto Select, Virtual Surround, Stereo, Movie, Music or Video Game. The menu lines indicate types of audio input signals.

Press the OK Button when the menu line is highlighted and select one of the available surround mode options, using the /¤ Buttons. Press the OK Button, then press the Back/Exit Button to exit the Surround Modes menu and display the next higher menu in the hierarchy.

See the Advanced Functions section for more information on surround modes.

Sleep Settings Button: Press to activate the sleep timer, which turns off the receiver after a programmed period of time of up to 90 minutes. Each press increases the timer by 10 minutes, ending with the “Sleep Off” message.

Volume Control: Press to raise or lower the volume.

Navigation (/¤// ) and OK Buttons: These buttons are used to make selections within the menu system and to operate the tuner.

Alphanumeric Keys: Use these buttons to enter numbers for radio station frequencies or to select station presets.

Last Channel: When controlling a cable, satellite or HDTV set-top box or a TV, press this button to return to the previous television channel.

Activity: With this button, up to eleven Activities may be programmed to transmit a series of commands with a single press. Execute an Activity by pressing this button, then the Alphanumeric Key (or the AVR Power On Button) into which it was programmed. See the Advanced Functions section for more information on Activities.

Back/Exit: Press to return to the previous menu or to exit the menu system.

Menu Button: This button is used to display the main menu on some source devices. To display the AVR 3550HD’s main menu, press the AVR Settings Button.

13

13

Image 13
Contents AVR 3550HD Important Safety Instructions Safety InformationDo not place the unit directly on a carpeted surface Important Safety InformationTable of Contents Harman Kardon AVR 3550HD 7.1-Channel Audio/Video Receiver IntroductionThank you for choosing a Harman Kardon product Audio SectionAudio Inputs Supplied AccessoriesAudio/Video Inputs Digital Audio InputsFRONT-PANEL Controls On When the AVR is turned on, this LED turns white Power Indicator This LED has three possible modesVolume Knob Turn this knob to raise or lower the volume REAR-PANEL Connections REAR-PANEL Connections REAR-PANEL Connections Main Remote Control Functions Main Remote Control Functions Main Remote Control Functions Zone 2 Remote Control Functions Zone 2 Remote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRSpeaker Connections SubwooferDigital Video Video ConnectionsAnalog Video Hdmi cable runs are limited to about 10 feetAntennas FM antenna uses a 75-ohm F-connector. See FigureRS-232 Serial Port Front Speaker Placement Speaker PlacementPlacement of Surround Speakers in a 5.1-Channel System Placement of Surround Speakers in a 7.1-Channel SystemStep One Connect the Speakers InstallationStep Two Connect the Subwoofer Step Three Connect the AntennasVideo Connections for non-HDMI sources Audio Connections for non-HDMI sourcesChoose one digital audio connection Optical or Coaxial Hdmi Video Connect the player as shown in FigureHdmi Video Connect the recorder as shown in Figure Connect an Audio/Video Recorder PVD, DVR or TiVoConnecting a Game Console, Camera or Other Device Connect an iPod Using Docking StationConnect a CD Player or Any Audio-Only Device Connect a Tape Deck or Any Audio-Only RecorderStep Five Connect the Video Display Step Six Plug in AC PowerEnter a code from , above Step Seven Insert Batteries in RemoteSatisfactory code set that operates most functions Learning Step Ten Install a Multizone System OptionalZone 2 Audio Outputs Step Eleven Turn On the AVR 3550HDAVR Power On and Source Selectors Using the On-Screen Menu System Initial SetupConfigure the AVR 3550HD Using EzSet/EQ Technology Select Cancel to return to the Speaker Setup menu Set Up SourcesChannel Direct Inputs Audio and Video Input SelectionHDMI-Equipped Multichannel Disc Player You are now ready to begin enjoying your new receiver ‹ / › Buttons to delay the audio by up to 180ms. See FigureOperation Source Selection Using the TunerXM Radio Operation To store a channel in one of the 40 preset locations Using Docking StationPress the OK Button to store the new preset RecordingPress the Menu Button to view the slide-out menu Selecting a Surround ModeMusic Navigates the audio materials stored on the iPod Auto SELECT, Surr VIRTUAL, Surr STEREO, Surr MOVIE, Surr CH Stereo plays the left-channel signal through the frontDigital Audio Signals Analog Audio SignalsAdvanced Functions Audio Processing and Surround SoundIndicates that no surround information is present Dolby Surround SettingsStep Three Manual Setup Menu Manual SetupNight Mode Step Two Measure Speaker DistancesSub Mode Adjust Crossover Frequencies MenuNumber of Speakers Adjust Speaker Distance Menu Step Four Setting Channel Output Levels ManuallyTone Control Determines whether the treble and bass Video AdjustmentsBrightness Adjustment How to Adjust the Custom Picture SettingsNature For programs shot outdoors, in a natural setting Sports For sporting eventsMultizone Operation General AVR Settings System SettingsOperating the Multizone System Menu AppearanceResetting the Remote Advanced Remote Control FunctionsPunch-Through Programming Activities MacrosMemory Processor ResetTroubleshooting Guide Table A2 Source Setting Defaults Appendix Default settings, worksheets, remote product codesAppendix Table A1 Recommended Source Component ConnectionsTable A4 Delay Setting Defaults Table A3 Speaker/Channel Setting DefaultsTable A6 Audio Effects Settings Table A5 Source SettingsTable A7 Video Modes Settings Table A10 System Settings Table A9 Remote Control CodesTable A8 Surround Modes Table A12 Surround Modes Table A11 Zone 2 SettingsExperience Tuner Mode Group Enveloping sound field is desiredMovie Back channel 0 or .1, EX Analog 2-channel Tuner Music adds a surround back channel Analog 2-channel TunerRate used on DVD-Video discs Surround Mode Description Incoming Bitstream or SignalPerformance Via Hdmi DTS-ES Matrix DTS StereoChannel Stereo Appropriate when a subwoofer is usedChannels Tuner PCM 32kHz, 44.1kHz or 48kHz Channel Stereo Analog Bypass41 42 Radio Table A13 Remote Control Function ListDMC1000 Table A13 Power OffButton Name GameAiwa Table A15 Remote Control Product Codes AUX-HDTV Table A16 Remote Control Product Codes AUX-VCRTable A14 Table A16Table A17 Table A18 Remote Control Product Codes DVDTable A20 Remote Control Product Codes Game Table A19 Remote Control Product Codes SATTable A21 Remote Control Product Codes CBL Table A23 Remote Control Product Codes Table A22 Remote Control Product CodesTable A24 Remote Control Product Codes AUX- TiVo Table A21Channels driven Dimensions Product Shipping Width General Power Requirement AC 120V/60Hz Power ConsumptionProduct Shipping Weight 31.5 lb 14.3kg 36.7 lb 16.7kg Linear High-Level 200mV/47k ohms