2. How to use
Deep Cleaner Description
1
32
4
| 17 | |
5 | 19 | |
| 18 | |
6 | 20 | |
7 | ||
9 | ||
8 | ||
21 | ||
| ||
10 |
| |
11 | 12 | |
16 | ||
| ||
15 | 17 | |
| 14 |
13 | 22 |
|
The assembled deep cleaner will look like the drawing. Model with SpinScrub™ hand tool is shown.
1.Hand grip
2.Solution trigger: press to release cleaning solution
3.ON/OFF switch
4.Wash/Rinse switch
5.SpinScrub™ hand tool (not included with all models)
6.Carrying handle
7.Clean water tank handle
8.Clean water tank
9.Detergent container
10.Recovery tank handle
11.Recovery tank: holds dirty solution
12.Recovery tank latches
13.Brush setting selector
14.Solution tube connection port
15.Nozzle
16.Hose connection port
17.Cord/hose hook: top hook rotates for quick cord release
18.Hose
19.Hose/tool caddy
20.Stair/upholstery nozzle
21.Bare floor tool (available at additional cost if not included with your cleaner)
22.Handle release pedal
This deep cleaner is intended for household use.
Operate deep cleaner only at voltage specified on data plate on back of cleaner. Plug deep cleaner into a properly grounded outlet.
ON/OFF switch
To turn cleaner ON, push switch down. To turn cleaner OFF, push switch up.
A
Handle release pedal
Step on pedal (A) to lower handle to operating position. Handle does not lock into a single position but “floats” to allow convenient operation.
To transport
To move your deep cleaner from room to room, put handle in upright and locked position, tilt deep cleaner back on wheels and push forward.
6