Harman-Kardon owner manual AVR 445 Technical Specifications

Page 62

AVR 445 TECHNICAL SPECIFICATIONS

Audio Section

Stereo Mode

Continuous Average Power (FTC)

80 Watts per channel, 20Hz–20kHz,

@ <0.07% THD, both channels driven into 8 ohms

Seven-Channel Surround Modes

Power per Individual Channel

Front L & R channels:

65 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

65 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, L & R back) channels: 65 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Dolby Pro Logic

40dB

Dolby Digital

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz – 130kHz

High Instantaneous

 

Current Capability (HCC)

±40 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

Supplied Accessories

The AVR 445 is supplied with the following accessory items. If any item is missing, please contact Harman Kardon customer service at www.harmankardon.com.

• Six AAA batteries

• Extender rod for microphone

• System remote control

• AM loop antenna

• ZR 10 remote control

• FM wire antenna

microphone

• AC power cord

AM Tuner Section

 

 

Frequency Range

520–1720kHz

 

Signal-to-Noise Ratio

45dB

 

Usable Sensitivity

Loop 500µV

 

Distortion

1kHz, 50% Mod 0.8%

 

Selectivity

±10kHz, 30dB

 

Video Section

 

 

Television Format

NTSC

 

Input Level/Impedance

1V p-p/75 ohms

 

Output Level/Impedance

1V p-p/75 ohms

 

Video Frequency Response

 

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

 

Video Frequency Response

 

 

(Component Video)

10Hz–60MHz (–3dB)

 

General

 

 

Power Requirement

AC 120V/60Hz

 

Power Consumption

120W at Power On, idle; 1,025W at rated power output

 

(7 channels driven)

 

Dimensions

Product

Shipping

Width

17-5/16 inches (440mm)

20-1/16 inches (510mm)

Height

6-1/2 inches (165mm)

10 inches (254mm)

Depth

17-1/16 inches (435mm)

22-3/16 inches (565mm)

Weight

39 lb (17.7kg)

46 lb (20.9kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon, Harman International and Logic 7 are registered trademarks of

Harman International Industries, Incorporated.

TheBridgeTM and

are trademarks of Harman International Industries, Incorporated.

Dolby, Pro Logic and the Double-D symbol are registered trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories.

DTS, DTS Surround, DTS-ES, DTS 96/24 and DTS Neo:6 are registered trademarks of DTS, Inc. A-BUS and A-BUS/READYare registered trademarks of Leisure Tech Electronics Pty Ltd Australia. SACD is a trademark of Sony Corporation.

iPod and iTunes are registered trademarks of Apple Computer, Inc.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

Microsoft, Windows and Windows Media are registered trademarks of Microsoft Corporation in the United States and other countries.

XM Ready is a registered trademark of XM Satellite Radio, Inc.

RealPlayer is a registered trademark of RealNetworks.

Winamp is a registered trademark of America Online, Inc.

TiVo is a registered trademark of TiVo Inc.

Please register your product on our Web site at www.harmankardon.com. NOTE: You’ll need the serial number of your AVR. At the same time, you can choose to be notified about our new products and/or special promotions.

62 TECHNICAL SPECIFICATIONS

Image 62
Contents AVR AUDIO/VIDEO ReceiverAVR 445 AUDIO/VIDEO Receiver Modèle pour les CanadienDescription and Features IntroductionSafety Information Important Safety Information4Tuning Selector Volume Control FRONT-PANEL ControlsIs installed FRONT-PANEL ControlsFRONT-PANEL Controls REAR-PANEL Connections You wish to control CD Audio Inputs Connect these jacks toDVD Video Inputs Connect the composite or Main Remote Control Functions To program the proper codes for the products in your system Second press selects the device connected to the Hdmi 2 jackMain Remote Control Functions Main Remote Control Functions ZR 10 Remote Control Functions 16 ZR 10 Remote Control Functions Audio Equipment Connections Installation and ConnectionsSystem Installation Your areaSystem and Power Connections RS-232 Connections BUSInstallation ConnectionsAC Power Connections USB ConnectionsSystem Configuration + and polarity indicators that are System SetupSubwoofer Placement Using the On-Screen DisplaySetting the System Configuration Memory In/Out SetupMaking Configuration Adjustments › Navigation Button DO U T S E T U P Pœ to return to the main menu screen Audio SetupSurround Setup ‹/› Navigation Buttons D once so that 96kHz appearsThen press the Set Button pœ ‹/› Navigation Buttons D to turn the mode on or OFFThree Dolby surround settings are ScreenUsing EzSet/EQ System Configuration Manual Setup So that on is highlighted and then press the Set Button pœSpeaker Size Menu Speaker SizeFollowing options are available LFE Low-Pass-Filter SettingTo continue with overall configuration Sub Mode Setting Subwoofer SizeDelay Adjust Setup menu Correct channelAdditional Input Adjustments Source Selection OperationBasic Operation Digital Audio Playback Volume and Tone ControlSurround Mode Selection Lower Display Line $. Next, useDolby Digital Selecting a Digital SourceTo the AVR PCM PlaybackSpeaker/Channel Indicators Night ModeXM Radio Operation Using TheBridgeTMAM/FM Tuner Operation For tuner operation have different functions with XM Radio RecordingFront-Panel Connections EzSet/EQ On/Off Output Level Trim AdjustmentMemory Backup Dim FunctionAdvanced Features If you wish to make other adjustments, press DMP/ TheBridgeTM Auto PowerMultiroom Operation Multiroom SetupInstallation Surround Channel Amplifier AssignmentMultiroom Operation Infrared Output SelectionBottom line Configuring the RemotePreprogrammed Code Entry Learning Commands Automatic Code EntryLearning Codes for an Input Selector Learning Keys for an Entire Device RemoteChanging Devices Macro ProgrammingPower On VID 2/TV VID 3/Cable AVR Logic 7 h Erasing a MacroMacro to be erased appears, press the Set Button F Punch-Through ConfigurationVolume Punch-Through Read a MacroTransport Punch-Through Returning the Channel Control Settings to Default OperationChannel Punch-Through As shown in Figure RenamingRenaming a Device CharactersAt this point, you have two options Resetting the RemoteBy pressing a particular button To be reenteredBacklight Options Additional Notes on Configuring and Operating the RemoteDevice Priority Timing To change the device priority timing, follow these stepsW B a T T E R Y Troubleshooting Guide Processor ResetSurround Mode Chart AppendixTuner Default SurroundVideo TapeVolume Default Sub ModeChannel Adjust Volume Default SetFeature DVD AVR 445 Technical Specifications