Harman-Kardon AVR 445 If you wish to make other adjustments, press, DMP/ TheBridgeTM Auto Power

Page 43

ADVANCED FEATURES

Full-OSD Time-Out Adjustment

The FULL OSD menu system is used to simplify the setup and adjustment of the AVR 445 by using a series of on-screen menus. The factory default setting for these menus leaves them on the screen for 20 seconds after a period of inactivity before they disap- pear from the screen (Time-Out). Time-Out is a safety measure to prevent image retention of the menu text in your monitor or projector, which might happen if it were left on indefinitely. However, some viewers may prefer a slightly longer or shorter period before the on-screen display disappears.

With the ADVANCED menu on the screen (Figure 23) make certain that the cursor is next to the FULL OSD TIME OUT line by pressing the /¤ Navigation Buttons D© as needed. Next, press the /Navigation Buttons D© until the desired time is displayed in seconds. Unlike most of the other options in this menu, this is a per- manent setting change, and the Time-Out entry will remain in effect until it is changed, even if the unit is turned off.

If you wish to make other adjustments, press the

/¤ Navigation Buttons D© until the cursor is next to the desired setting or the BACK TO MASTER MENU line and press the Set Button œ. If you have no other adjustments to make, press the OSD Button Uto exit the menu system.

DMP/ TheBridgeTM Auto Power

When using Harman Kardon’s optional TheBridgeTM iPod docking station, the normal operation is to have the iPod selected as the input source only when it is specifically chosen. However, you may set the AVR so that whenever the iPod is turned on, the AVR will also turn on automatically and set The Bridge as the input.

To change the setting, first make certain that the ADVANCED menu (Figure 23) is on the screen, and then press the /¤ Navigation Buttons D© until the cursor is pointing to DMP AUTO POWER. Press the /¤ Navigation Buttons D© so that ON is highlighted to have the AVR turn on in sync with an iPod, or OFF for standard operation.

ADVANCED FEATURES 43

Image 43
Contents AUDIO/VIDEO Receiver AVRModèle pour les Canadien AVR 445 AUDIO/VIDEO ReceiverIntroduction Description and FeaturesImportant Safety Information Safety InformationFRONT-PANEL Controls 4Tuning Selector Volume ControlFRONT-PANEL Controls Is installedFRONT-PANEL Controls REAR-PANEL Connections CD Audio Inputs Connect these jacks to You wish to controlDVD Video Inputs Connect the composite or Main Remote Control Functions Second press selects the device connected to the Hdmi 2 jack To program the proper codes for the products in your systemMain Remote Control Functions Main Remote Control Functions ZR 10 Remote Control Functions 16 ZR 10 Remote Control Functions Your area Installation and ConnectionsSystem Installation Audio Equipment ConnectionsSystem and Power Connections USB Connections BUSInstallation ConnectionsAC Power Connections RS-232 ConnectionsSystem Configuration Using the On-Screen Display System SetupSubwoofer Placement + and polarity indicators that are› Navigation Button D In/Out SetupMaking Configuration Adjustments Setting the System Configuration MemoryO U T S E T U P ‹/› Navigation Buttons D once so that 96kHz appears Audio SetupSurround Setup Pœ to return to the main menu screenScreen ‹/› Navigation Buttons D to turn the mode on or OFFThree Dolby surround settings are Then press the Set Button pœUsing EzSet/EQ System Configuration So that on is highlighted and then press the Set Button pœ Manual SetupSpeaker Size Speaker Size MenuSubwoofer Size LFE Low-Pass-Filter SettingTo continue with overall configuration Sub Mode Setting Following options are availableDelay Adjust Correct channel Setup menuAdditional Input Adjustments Basic Operation OperationSource Selection Lower Display Line $. Next, use Volume and Tone ControlSurround Mode Selection Digital Audio PlaybackSelecting a Digital Source Dolby DigitalPCM Playback To the AVRNight Mode Speaker/Channel IndicatorsAM/FM Tuner Operation Using TheBridgeTMXM Radio Operation Front-Panel Connections RecordingFor tuner operation have different functions with XM Radio Dim Function Output Level Trim AdjustmentMemory Backup EzSet/EQ On/OffAdvanced Features DMP/ TheBridgeTM Auto Power If you wish to make other adjustments, pressSurround Channel Amplifier Assignment Multiroom SetupInstallation Multiroom OperationInfrared Output Selection Multiroom OperationPreprogrammed Code Entry Configuring the RemoteBottom line Automatic Code Entry Learning CommandsLearning Keys for an Entire Device Remote Learning Codes for an Input SelectorMacro Programming Changing DevicesErasing a Macro Power On VID 2/TV VID 3/Cable AVR Logic 7 hRead a Macro Punch-Through ConfigurationVolume Punch-Through Macro to be erased appears, press the Set Button FChannel Punch-Through Returning the Channel Control Settings to Default OperationTransport Punch-Through Characters RenamingRenaming a Device As shown in FigureTo be reentered Resetting the RemoteBy pressing a particular button At this point, you have two optionsTo change the device priority timing, follow these steps Additional Notes on Configuring and Operating the RemoteDevice Priority Timing Backlight OptionsW B a T T E R Y Processor Reset Troubleshooting GuideAppendix Surround Mode ChartTape Default SurroundVideo TunerVolume Default Set Sub ModeChannel Adjust Volume DefaultFeature DVD AVR 445 Technical Specifications