Safety Precautions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!	electric shock, property damage or personal injury.
	For your safety, the information in this manual must be followed to minimize the risk of

■Check and comply with your state and local codes. You must follow these guidelines.

■Use care when handling the water softening system. Do not turn upside down, drop, drag, or set on sharp protrusions.

■Water softening systems using sodium chloride (salt) for regeneration add sodium to the water. Persons on sodium restricted diets should consider the added sodium as part of their overall intake. Potassium chloride can be used as an alternative to sodium chloride in your softener.

■The water softening system works on 24 volt-60 Hz electrical power only. Be sure to use only the included transformer.

■Transformer must be plugged into an indoor 120 volt, grounded outlet only.

■Use clean water softening salts only, at least 99.5% pure. NUGGET, PELLET or coarse SOLAR salts are recommended. Do not use rock, block, granulated or ice cream making salts. They contain dirt and sediments, or mush and cake, and will create maintenance problems.

■Keep the salt hole cover in place on the softener unless servicing the unit or refilling with salt.

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

PROPER INSTALLATION

This water softening system must be properly installed and located in accordance with the Installation Instructions before it is used.

■Install or store where it will not be exposed to temperatures below freezing or exposed to any type of weather. Water freezing in the system will break it. Do not attempt to treat water over 100°F.

■Do not install in direct sunlight. Excessive sun heat may cause distortion or other damage to non-metallic parts.

■Properly ground to conform with all governing codes and ordinances.

■Use only lead-free solder and flux for all sweat-solder connections, as required by state and federal codes.

■The water softening system requires a minimum water flow of three gallons per minute at the inlet. Maximum allowable inlet water pressure is 125 psi. If daytime pressure is over 80 psi, nighttime pressure may exceed the maximum. Use a pressure reducing valve to reduce the flow if necessary.

■Softener resins may degrade in the presence of chlorine above 1 ppm. If you have chlorine in excess of this amount, you may experience less life of the resin. In these conditions, you may wish to consider purchasing a GE point-of-entry household filtration system with a chlorine reducing filter.

WARNING: Discard all unused parts and packaging material after installation. Small parts remaining after the installation could be a choke hazard.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

GXSF27B GNSF35Z GXSF39B specifications

The GE GXSF27B, GNSF35Z, and GXSF39B are part of General Electric's line of advanced water filtration systems designed to enhance water quality for residential use. Each model boasts unique features and technologies aimed at providing clean and safe drinking water while ensuring convenient and efficient operation.

The GE GXSF27B model is known for its high-capacity, high-flow filtration capabilities. This system can effectively reduce sediment, chlorine taste and odor, and other impurities that can affect water quality. The GXSF27B comes equipped with a user-friendly control panel that simplifies monitoring and maintenance. Its compact design allows for seamless installation in various spaces, making it an attractive option for homeowners seeking efficient filtration without the bulk.

In contrast, the GE GNSF35Z model excels in removing challenging contaminants, particularly those often found in municipal water supplies. It utilizes a three-stage filtration process that ensures thorough cleaning and purification. The GNSF35Z features advanced filtration media designed to capture particles smaller than traditional filters, providing an enhanced level of water quality. Its smart technology automatically alerts users when filter changes are needed, thus preventing the degradation of filtration performance.

The GE GXSF39B model is a go-to choice for households requiring a significant volume of filtered water. With a higher capacity than its counterparts, it can serve large families or those with greater consumption needs. The GXSF39B incorporates an innovative water softening component that helps reduce hard water scale buildup in plumbing, increasing the longevity of appliances. This system ensures that users enjoy soft, clean water while also extending the lifespan of their household items.

All three models share key characteristics such as easy installation and maintenance, energy-efficient operation, and durable construction that ensures longevity. With their robust design and advanced technologies, the GE GXSF27B, GNSF35Z, and GXSF39B provide homeowners with peace of mind, knowing that they are investing in a reliable water filtration solution. Ultimately, these GE models cater to various needs and preferences, making them solid choices for anyone prioritizing water quality in their home.