Resetting the Remote Memory

Signature 2.0

Remote Control Programming

To program the remote, follow these steps. Note that it is not necessary to program all keys, only those that are required to operate the subject device. Keys not programmed will retain the codes preprogrammed at the factory.

1.Slide the Use/Learn switch e at the top left corner of the remote to the right so that it is next to Learn.

2.If one of the multifunction buttons is being programmed press the source button (e.g., CD, Vid 1) you wish to have this function associated with. If you are programming a single function key, proceed to the next step.

3.Press the button on the remote that is to be programmed. Note that the Learning LED b will illuminate.

4.Place the 2.0’s remote head to head with the other remote control whose function is being learned. The two remotes should be no more than 8 inches apart.

5.Press and hold the button on the other remote corresponding to the function to be memorized until the Learning LED starts to blink. When the LED goes out, release the button on the transmitting remote. The function code has been successfully captured by the 2.0’s remote.

NOTE: If both LEDs flash during a programming operation, it indicates that the remote’s memory is full or that the remote codes from the transmitting remote are not compatible with the unit’s signal format.

6.Continue to program any additional remote com- mands required using steps 2 through 5. When you have finished programming the remote, slide the Use/Learn switch e to the left so that it is in the Use position.

In normal operation, codes for a new device may be programmed “over” the codes that have been previously programmed into the remote. It is also possible to reset the memory for individual keys, or for the entire remote. When a memory position is reset, the remote will return to the original factory preset command.

To reset the memory for a specific individual key location, put the Use/Learn switch in the Learn position. Press the Main Power Off button a and the button to be reset at the same time. Both the Sending and Learning indicators will light momentarily. When the lights go out, the memory has been cleared of the user programmed code and reset to the factory preset. Return the Use/Learn switch e to the Use position when you are finished.

To reset the remote’s entire memory and return all keys to their factory preset commands first put the Use/Learn switch e in the Learn position. Then press the Main Power On button a and confirm that the Learn LED b has illuminated. While con- tinuing to press the Main Power On button, press and hold the Main Power Off button a button until the Learn LED goes off for about 3 seconds. It will then blink twice. Then release the two buttons. This indicates that the memory has been cleared of any user programmed commands and that the original commands have been restored. Slide the Use/Learn switch e back to the Use position to return the remote to normal operation.

HA160-0004-A specifications

The Harman-Kardon HA160-0004-A is a premium audio amplifier that epitomizes the brand's commitment to high-fidelity sound and innovative technology. This device is designed for audiophiles who demand exceptional performance and a rich listening experience, making it an excellent choice for both home theater systems and high-end audio setups.

One of the standout features of the HA160-0004-A is its power capability. The amplifier delivers an impressive output of 80 watts per channel, ensuring that even the most demanding speakers can perform efficiently without distortion. This power is complemented by a carefully designed Class AB amplification architecture, which combines the benefits of both Class A and Class B designs. The result is a warm, natural sound with a high level of detail across the audio spectrum.

The HA160-0004-A supports a wide range of audio formats and input options, making it versatile for any home audio system. It is equipped with multiple analog inputs, including RCA and balanced XLR inputs, allowing users to connect various audio sources seamlessly. Additionally, it includes digital audio inputs such as optical and coaxial, accommodating modern digital audio playback devices. Users can easily switch between sources using the intuitive front panel or remote control.

Harman-Kardon's commitment to sound quality is further exemplified by the use of high-quality components within the HA160-0004-A. The amplifier features advanced circuitry designed to minimize noise and distortion, which is crucial for preserving the integrity of the audio signal. This results in a clear and dynamic sound, whether listening to music, watching movies, or gaming.

Another noteworthy characteristic of the HA160-0004-A is its sleek, elegant design. The chassis is built with high-quality materials, showcasing a clean aesthetic that will complement any modern audio setup. The front panel features a user-friendly layout with an illuminated display, making it easy to monitor input selections and volume levels.

Additionally, the HA160-0004-A is engineered for durability and longevity, with robust construction that allows it to withstand regular use over time. This amplifier is not only a powerful audio device but also an appealing centerpiece for your entertainment space.

In conclusion, the Harman-Kardon HA160-0004-A amplifier represents a blend of performance, versatility, and style. With its powerful output, advanced technologies, and elegant design, it is well-suited for audiophiles and casual listeners alike, ensuring a superior audio experience across various applications.