Harman-Kardon HA160-0004-A manual Tuner Menu, Figure OSD-33

Signature 2.0

Operation

The tuner will search upward through the FM band, automatically examining each station to see if it is send- ing RDS data and looking to see what the PTY is. When the next FM station that meets the search criteria is tuned, the scan will stop and the station will be tuned. If no station is found that matches the desired PTY type after a complete scan of the FM band, the tuner will return to the last station tuned.

Tuner Menu

In addition to using the direct access controls described above, it is possible to program the tuner functions and enter presets using the Tuner Menu. This enables you to quickly set the tuner memory, and it is a method of tuner operation to consider during the initial configuration of the 2.0.

The Tuner Menu also allows you to give FM stations personalized names and Program Types even

if they do not transmit RDS data.

To reach the Tuner Menu, the tuner must first be selected as the input source. Press the Tuner button g or select the tuner using the front panel Source Selectors 3 if the tuner is not already in use.

Press the Menu button j to display the Setup Menu (Figure OSD-33). The Tuner > line will be highlighted.

	S e t u p M e n u
T u n e r		>
R e c o r d O u t p u t s		>
S o u r c e s		>
S p e a k e r S e t u p		>
A d v a n c e d S e t u p		>

Figure OSD-33

Note that this line does not appear on the Setup Menu (Figure OSD-1) when the tuner is not selected as the input source. Press the Ý Menu Control button i to display the Tuner Menu. The menu will differ depending on the frequency band in use. One menu will appear when an FM station is currently

tuned (Figure OSD-34), while a different, shorter menu (Figure OSD-35) will appear when an AM station is currently tuned.

	T u n e r	M e n u
P S e t :		0	1
F R E Q :		8	9	. 9
B a n d :		F M
R D S :		A u t o
I D :		K X X X - F M
T y p e :		P U B L I C
T y p e S e a r c h				>

Figure OSD-34

	T u n e r	M e n u
P S e t :		0 1
F R E Q :		1	0	7 0
B A N D :		A	M

Figure OSD-35

The first line on both Tuner Menu screens is the Preset memory function. If a station currently tuned already has been assigned a preset memory location, a number will be shown on this line. While this line is highlighted you may also change to another preset station by pressing the Ü or Ý Menu Control buttons i until the desired station is tuned. You may also assign a new preset on this menu, but before doing that it is necessary to proceed with the other entries on this menu page and then return to the PSet line. When you are finished with any change on this line, press the

ÛMenu Control button i to move to the next line.

The RDS line enables you to determine if RDS data will automatically be displayed when the tuner detects RDS data on a station’s transmissions or to alternatively display information manually entered using the ID and Type lines of this menu Press the Ü or Ý Menu Control buttons i to select from one of the following choices.

50