Harman-Kardon HA160-0004-A Operating the Signature, Turn On/Turn Off, Volume Control and Mute

Page 41

Signature 2.0

Operating the Signature 2.0

Once the Signature 2.0 has been installed and configured, and the initial settings entered, day-to-day operation is simple, thanks to on-screen menus and direct-access remote commands. Although the menu system is always available to make global system changes, most of the basic aspects of the 2.0 are taken care of with one press of a button.

Turn On/Turn Off

For normal operation, the Master Power Switch 1 should be placed in the ON position by pressing it in with the tip of a pen or other narrow object until it latches in a flush position with the front panel. As soon as the Master Power Switch is engaged, the Information Display will come on briefly and display the software revision (Figure FPD-1) followed by a power off message (Figure FPD-2). The display will then go blank, but the Standby LED 5 will turn amber as a reminder that the unit is in a Standby mode.

The 2.0 may be turned on in one of three ways. Pressing either the front panel Standby Switch 2, or the Main Power On button a on the remote. In either case the 2.0 will turn on as shown by the Standby LED 5 going dark while the Power Indicator 6 shows a soft blue light behind the word “Signature.” If the 2.0 is connected to a Signature Series power amplifier or another compatible amplifier via the remote Trigger Output connection » it will receive a turn-on signal.

When the unit is turned on the front panel display will briefly show a welcome message (Figure FPD-3) followed by the display that is appropriate to the input that was selected when the 2.0 was last turned off. If the 2.0 is connected to a video display there will also be a brief display of the status information for the input source that is in use.

The 2.0 may also be turned on by pressing any of the Source Selection buttons g on the remote.

To return the 2.0 to the standby mode, press the front panel Standby Switch 2or the Main Off button a on the remote. A Power Off Standby message

will briefly appear in both the front panel Information Display (Figure FPD-2) and the On-Screen Display System (Figure OSD-12). The Power Indicator 6 will go dark and be replaced by the Standby LED 5 illuminating in amber. The power-on trigger will also turn off automatically, causing any amplifiers connected to the 2.0 to also return to the Standby mode.

P O W E R O F F S T A N D B Y

Figure OSD-12

When the 2.0 will not be used for an extended period of time it is a good idea to turn the 2.0 completely off using the Main Power Switch 1. To turn that switch off, press the switch in and the release it so that it pops out to the extended position. When the 2.0 is totally off, the Standby LED 5 will go dark.

Volume Control and Mute

When the 2.0 is turned on, it will always be at the volume level set in the Advanced Settings menu (Figure OSD-10). Once the unit is turned on the volume may be raised or lowered at any time with either the front panel Volume Control Knob 9 or the Main

Volume Controls r on the remote.

NOTE: The TV Volume Controls q on the remote may be used to change the volume level directly on your television set when the proper infrared codes have been entered. These buttons raise and lower the volume for the TV itself, and have no bearing on the volume level from the 2.0. When shipped from the factory, these buttons have the volume controls for the popular “RC-5” remote control system used by many manufacturers.

If the 2.0 remote does not immediately control the volume on your TV, follow the instructions on page 17

Operation

37

Page 40 Page 42
Image 41
Page 40 Page 42
Contents HKSIG20 Page Signature 2.0 Processor/Tuner Staple or clip your original invoice here. Û Introduction Important Safety Information Cleaning Unpacking and InstallationTypographic Conventions Moving The UnitQuick-Start Instructions Equipment Required for Quick-Start InstallationQuick Start Quick Start Connection and SetupQuick Start Instructions Operating Hints Standby LED Front Panel ControlsFront Panel Controls ÞÝÜ Rear Panel ConnectionsOptical Digital Audio Inputs Connect Volume Volume Remote Control OperationMemorized Remote Control Operation Remote Control Operation Remote Control Range Remote Control ProgrammingLoading Batteries To change the batteriesTV, Vid 1, Vid 2, Vid 3, Tuner, CD, Tape Programmable KeysResetting the Remote Memory Audio Inputs System InstallationInput Connections Output Connections System and Accessory InputsVideo Inputs Audio OutputsRecord Outputs System Accessory ConnectionsSpeaker Placement System ConfigurationSpeaker Selection and Placement Signature Series Ver Configuring Your SystemPower Off Standby TVVol Dolb y ProLo gic Speaker SetupSignature Series Power On Standby Figure OSD-3 Distances Menu Control button i until SpeakerFigure OSD-5 Source ConfigurationInput Assignment Surround Mode AssignmentVideo Detect Input Level AdjustInput Level Effects SetupSet Input Levels Input Level Ref EffectsBalance Figure OSD-9 Balance 0 LF F/B 6 BAKPower-Up State Advanced SetupTurn-On Volume System Control and Unit ID Standby When this option is selected,Figure OSD-11 Display OptionsFigure FPD-7 Display Options Video Fmt NtscTurn On/Turn Off Volume Control and MuteOperating the Signature Video Mute Dolby ProLogic Volume01 90.7 FM Vol Source SelectionTuner Vol Stereo DVDVol Dolb y D i g ital Surround Mode ChangeTreble Cut Direct Access ControlsSubwoofer Trim Bass BoostBalance Center Channel AdjustSurround Adjust Figure OSD-24 Display Status ReportTuner and Frequency Band Selection Tuner OperationFM Tuning Mode Selection Manual TuningDirect Access Tuning 02 89.9 FM . VolÐÐ 90.7 FM . Vol 0110 Preset TuningRDS Display RDS Tuning04 91.5 FM . Vol 04 91.5 FM05 102.7 FM Search RDS Program Type Search04 91.5 FM . Vol RDS ID Figure OSD-33 Tuner MenuFigure OSD-36 Station Naming and Personal PreferencesInput Track Recording Simulcast OperationRecording Figure OSD-38 Selectable RecordingError Messages Troubleshooting GuideSystem Reset Digital Noise With DVD PlayersMenu Control button Symptom Possible Cause Solution Troubleshooting ChartSources Speaker Setup Factory PresetsAdvanced Settings TunerSources User WorksheetsSoftware Version Dolby Pro Logic Surround Mode DefinitionsDolby Digital Mono Dolby DigitalDolby Digital Late Night Movie Modes DTSMono + MonoStereo TOP Top 40 Music RDS Data SystemProgram Type Program Type Name PTY Abbreviation Treble Cut Bass BoostInputs Signature 2.0 Processor/Tuner SpecificationsOutputs Surround ModesGeneral Signal-To-Noise RatioTuner Section FM Description Subject Index Subject Index

HA160-0004-A specifications

The Harman-Kardon HA160-0004-A is a premium audio amplifier that epitomizes the brand's commitment to high-fidelity sound and innovative technology. This device is designed for audiophiles who demand exceptional performance and a rich listening experience, making it an excellent choice for both home theater systems and high-end audio setups.

One of the standout features of the HA160-0004-A is its power capability. The amplifier delivers an impressive output of 80 watts per channel, ensuring that even the most demanding speakers can perform efficiently without distortion. This power is complemented by a carefully designed Class AB amplification architecture, which combines the benefits of both Class A and Class B designs. The result is a warm, natural sound with a high level of detail across the audio spectrum.

The HA160-0004-A supports a wide range of audio formats and input options, making it versatile for any home audio system. It is equipped with multiple analog inputs, including RCA and balanced XLR inputs, allowing users to connect various audio sources seamlessly. Additionally, it includes digital audio inputs such as optical and coaxial, accommodating modern digital audio playback devices. Users can easily switch between sources using the intuitive front panel or remote control.

Harman-Kardon's commitment to sound quality is further exemplified by the use of high-quality components within the HA160-0004-A. The amplifier features advanced circuitry designed to minimize noise and distortion, which is crucial for preserving the integrity of the audio signal. This results in a clear and dynamic sound, whether listening to music, watching movies, or gaming.

Another noteworthy characteristic of the HA160-0004-A is its sleek, elegant design. The chassis is built with high-quality materials, showcasing a clean aesthetic that will complement any modern audio setup. The front panel features a user-friendly layout with an illuminated display, making it easy to monitor input selections and volume levels.

Additionally, the HA160-0004-A is engineered for durability and longevity, with robust construction that allows it to withstand regular use over time. This amplifier is not only a powerful audio device but also an appealing centerpiece for your entertainment space.

In conclusion, the Harman-Kardon HA160-0004-A amplifier represents a blend of performance, versatility, and style. With its powerful output, advanced technologies, and elegant design, it is well-suited for audiophiles and casual listeners alike, ensuring a superior audio experience across various applications.
Top Page Image Contents