Harman-Kardon HA160-0004-A manual Output Connections, Video Inputs, System and Accessory Inputs

Page 24

Signature 2.0

System Installation

The 2.0 may also be connected to an optional, external audio processor or decoder that accommodates digital systems the 2.0 cannot handle internally. The analog output connections from any external processor should be made to the 6-CH Direct Inputs Á.

Video Inputs

Video source connections are made to either the Composite Video or S-Video Inputs ß Ü. When connecting an audio/video device such as a VCR or DVD it is a good idea to make all connections to the same input number, (e.g., Video 1, Analog Audio 1, Digital Audio 1) although any input number may be used as long as you keep a note of which source is connected to each numbered video input.

Once audio or video connections are made, they may be matched with any other connection. They may also be used with more than one input profile. For example, the video output of a VCR or cable box may be used both with the VCR’s own audio source for normal play- back, but it may also be used with the 2.0’s built-in tuner so that, for example, you may watch the video of a sports broadcast along with the commentary from a radio station using the simulcast feature.

System and Accessory Inputs

Assemble the AM loop antenna as shown below. Connect it to the AM Antenna Inputs á on the rear panel.

Connect the FM antenna to the FM (75 ohm) connection a. The FM antenna may be an external roof antenna, an inside powered or wire-lead antenna, or a connection from a cable TV system. Note that if the antenna or connection uses 300-ohm twin-lead cable, you must use the 300-ohm to 75-ohm adapter supplied with the unit to make the connection.

If the 2.0’s front panel remote sensor is blocked by cabinet doors or other obstructions, an optional, external IR sensor may be connected to the IR Input ¦. If you are connecting multiple products to the same sensor, in some applications the “IR In” may be connected to the IR output of another compatible Harman Kardon product. Consult your dealer or custom installer if you have questions concerning the use of the IR input.

An RS-232 Input ¤ is provided for use with custom remote systems. Connections to this input jack should ONLY be made by installers who are specially trained in its use.

Output Connections

Audio Outputs

Using high-quality audio interconnect cables, connect the Main Channel Audio Outputs ¢ to matching audio inputs of your audio power amplifier for the left, center, right, right surround and left surround channels. Connect the power amplifier to the speakers in accordance with the instructions provided by the amplifier and speaker manufacturers.

Connections from the Subwoofer Output ° should be made to the mono line level input of a powered sub- woofer or to the input of an audio power amplifier used to power a passive subwoofer. In the event that the input of the powered subwoofer has both left and right line level inputs, consult the instructions provided with the subwoofer to determine which input should be used, or if any other special connection is required.

For Subwoofers with a stereo input only, it may be necessary to use an optional “Y” cable. Consult the Subwoofer’s instructions or your dealer for additional information.

Video Outputs

Using high-quality video interconnect cables with a coaxial-style construction, connect the Composite Video Main Output Þ and/or S-Video Main Output Û to the video or S-Video inputs of your TV, projector, video monitor or other video display device or processor.

20

Page 23 Page 25
Image 24
Page 23 Page 25
Contents HKSIG20 Page Signature 2.0 Processor/Tuner Staple or clip your original invoice here. Û Introduction Important Safety Information Unpacking and Installation CleaningTypographic Conventions Moving The UnitEquipment Required for Quick-Start Installation Quick-Start InstructionsQuick Start Connection and Setup Quick StartQuick Start Instructions Operating Hints Front Panel Controls Standby LEDFront Panel Controls Rear Panel Connections ÞÝÜOptical Digital Audio Inputs Connect Remote Control Operation Volume VolumeMemorized Remote Control Operation Remote Control Operation Remote Control Programming Remote Control RangeLoading Batteries To change the batteriesProgrammable Keys TV, Vid 1, Vid 2, Vid 3, Tuner, CD, TapeResetting the Remote Memory System Installation Input ConnectionsAudio Inputs System and Accessory Inputs Output ConnectionsVideo Inputs Audio OutputsSystem Accessory Connections Record OutputsSystem Configuration Speaker Selection and PlacementSpeaker Placement Configuring Your System Power Off StandbySignature Series Ver Speaker Setup Signature Series Power On StandbyTVVol Dolb y ProLo gic Figure OSD-3 Menu Control button i until Speaker DistancesSource Configuration Figure OSD-5Surround Mode Assignment Input AssignmentInput Level Adjust Video DetectEffects Setup Input LevelSet Input Levels Input Level Ref EffectsBalance Balance 0 LF F/B 6 BAK Figure OSD-9Advanced Setup Turn-On VolumePower-Up State Standby When this option is selected, System Control and Unit IDDisplay Options Figure OSD-11Display Options Video Fmt Ntsc Figure FPD-7Volume Control and Mute Operating the SignatureTurn On/Turn Off Volume Video Mute Dolby ProLogicSource Selection Tuner Vol Stereo01 90.7 FM Vol Surround Mode Change DVDVol Dolb y D i g italDirect Access Controls Treble CutBass Boost Subwoofer TrimCenter Channel Adjust Surround AdjustBalance Display Status Report Figure OSD-24Tuner Operation Tuner and Frequency Band SelectionManual Tuning FM Tuning Mode SelectionDirect Access Tuning 02 89.9 FM . VolPreset Tuning ÐÐ 90.7 FM . Vol 0110RDS Tuning RDS Display04 91.5 FM . Vol 04 91.5 FMRDS Program Type Search 04 91.5 FM . Vol RDS ID05 102.7 FM Search Tuner Menu Figure OSD-33Station Naming and Personal Preferences Figure OSD-36Simulcast Operation RecordingInput Track Recording Selectable Recording Figure OSD-38Troubleshooting Guide Error MessagesSystem Reset Digital Noise With DVD PlayersMenu Control button Troubleshooting Chart Symptom Possible Cause SolutionFactory Presets Sources Speaker SetupAdvanced Settings TunerUser Worksheets Software VersionSources Surround Mode Definitions Dolby Pro LogicDolby Digital Dolby Digital Late NightDolby Digital Mono DTS Movie ModesMono StereoMono + RDS Data System Program Type Program Type Name PTY AbbreviationTOP Top 40 Music Bass Boost Treble CutSignature 2.0 Processor/Tuner Specifications InputsOutputs Surround ModesSignal-To-Noise Ratio Tuner Section FMGeneral Description Subject Index Subject Index

HA160-0004-A specifications

The Harman-Kardon HA160-0004-A is a premium audio amplifier that epitomizes the brand's commitment to high-fidelity sound and innovative technology. This device is designed for audiophiles who demand exceptional performance and a rich listening experience, making it an excellent choice for both home theater systems and high-end audio setups.

One of the standout features of the HA160-0004-A is its power capability. The amplifier delivers an impressive output of 80 watts per channel, ensuring that even the most demanding speakers can perform efficiently without distortion. This power is complemented by a carefully designed Class AB amplification architecture, which combines the benefits of both Class A and Class B designs. The result is a warm, natural sound with a high level of detail across the audio spectrum.

The HA160-0004-A supports a wide range of audio formats and input options, making it versatile for any home audio system. It is equipped with multiple analog inputs, including RCA and balanced XLR inputs, allowing users to connect various audio sources seamlessly. Additionally, it includes digital audio inputs such as optical and coaxial, accommodating modern digital audio playback devices. Users can easily switch between sources using the intuitive front panel or remote control.

Harman-Kardon's commitment to sound quality is further exemplified by the use of high-quality components within the HA160-0004-A. The amplifier features advanced circuitry designed to minimize noise and distortion, which is crucial for preserving the integrity of the audio signal. This results in a clear and dynamic sound, whether listening to music, watching movies, or gaming.

Another noteworthy characteristic of the HA160-0004-A is its sleek, elegant design. The chassis is built with high-quality materials, showcasing a clean aesthetic that will complement any modern audio setup. The front panel features a user-friendly layout with an illuminated display, making it easy to monitor input selections and volume levels.

Additionally, the HA160-0004-A is engineered for durability and longevity, with robust construction that allows it to withstand regular use over time. This amplifier is not only a powerful audio device but also an appealing centerpiece for your entertainment space.

In conclusion, the Harman-Kardon HA160-0004-A amplifier represents a blend of performance, versatility, and style. With its powerful output, advanced technologies, and elegant design, it is well-suited for audiophiles and casual listeners alike, ensuring a superior audio experience across various applications.
Top Page Image Contents