OPERATING THE RADIOPHONE | BASIC FUNCTIONS |
➮Press OK.
➮Press 
/
to select the desired setting from between 0 (no delay) and 90 min.
➮Press OK.
➮Press SRC to exit the DSC menu.
Switching on the Radiophone when the ignition is switched off
➮Press ON.
The Radiophone will switch on.
To avoid running down the battery, the Ra- diophone will switch off again automatically after one hour.
Switching the Radiophone on after the unit has been disconnected from its power supply
If the Radiophone has been disconnected from the battery (e.g. when the vehicle is be- ing repaired) and is reconnected, you will be required to enter the security code in the ra- dio pass the first time you switch it on again.
Basic functions
Selecting the audio mode
You can switch between radio, CD changer operation and the operation of an auxiliary audio source (if connected).
➮Press SRC repeatedly until the functions for the operating mode you want to se- lect appear in the display.
Direct access to functions (PaX)
You can program the PaX button with one function you use frequently for direct access.
Select one of the following functions:
●Radiotext
●Telephone number
●Mailbox
●Send SMS
●Network selection
●Call forwarding
●Telephone book
Note:
You can change the function you have se- lected for the PaX button at any time.
Programming the PaX button
➮Press and hold down the PaX button for longer than one second.
The list of available functions will appear in the display. If the PaX button has already been programmed, the cursor will indicate the func- tion currently selected.
➮Press 
/
to select the desired func- tion.
➮Press OK.
PaX program. finished will appear in the dis- play.
The main telephone menu will now appear in the display. The PaX button is ready to use.
10
