OPERATING THE RADIOPHONE
Operating the Radiophone
Audio operation (without the telephone)
➮Press ON.
Note:
If the card tongue is not pushed in when you switch on the unit, the Radiophone will switch off again automatically after 15 seconds.
If you push the card tongue in within the first 15 seconds, the Radiophone will not switch off.
When you switch on the Radiophone for the first time,
➮enter the
If you enter an incorrect digit,
➮press CLR to delete the digit.
➮Press OK to confirm the code.
For audio and telephone operation
With the card tongue pushed in,
➮press the card tongue gently in the direc- tion of the Radiophone until you feel slight resistance.
➮Release the card tongue.
The card tongue will now eject from the Ra- diophone.
➮Lay the SIM card on the card tongue with the chip facing upwards and to- wards the Radiophone and push it into the slot until you feel slight resistance.
➮Press the SIM card gently down at the back onto the card tongue so that it is lying completely on the card tongue.
➮Push the card tongue into the Radio- phone gently until you feel slight resist- ance and you hear the card tongue click into position.
The Radiophone will switch on. If the PIN in- quiry has been activated, ENTER PIN will
appear in the display. Also refer to “Switching the PIN code on/off”.
Removing the SIM card
Never just pull out the SIM card. You could destroy it.
➮Push the SIM card in gently, towards the Radiophone.
The card tongue holding the SIM card will eject.
➮Remove the SIM card.
Switching the Radiophone on/off with the vehicle ignition
➮When the Radiophone is on, switch off the vehicle ignition and remove the igni- tion key.
The Radiophone will switch off.
➮Switch on the ignition.
The Radiophone will switch on if you switched it off with the vehicle ignition.
Note:
If the ignition timer is switched on, the Radio- phone will not switch off until after the time set has elapsed.
If the SIM card is still in the Radiophone when it is switched off, you will hear two beeps.
If the ignition is switched off during a telephone call, the Radiophone will remain switched on until the telephone call has been completed.
Set the ignition timer
You can set the ignition timer to determine whether and how long the Radiophone should continue to play after the ignition has been switched off.
➮If you are in telephone mode, press the SRC button to switch to radio operation.
➮Press OK to access the DSC menu.
➮Use 
/
to select the menu item Setup.
➮Press OK.
➮Press 
/
to select the menu item Ignit. timer.
9
