TELEPHONE SETTINGS
➮Press CLR repeatedly until you return to the main menu or press and hold down CLR for longer than one second to return to the DSC menu.
Adjusting the
The
➮In the telephone mode, press OK.
The DSC menu will appear in the display. The cursor 
will mark Setup.
➮Press OK.
The Setup menu will appear in the display. The cursor 
will mark Volume.
➮Press OK.
➮Press 
to select Handsfree.
➮Press OK.
You will hear the phone ring at the volume currently selected.
➮Press 
/
or turn the volume control knob to select the desired volume.
➮Press OK.
You will return to the Volume menu.
➮Press CLR repeatedly until you return to the main menu or press and hold down CLR for longer than one second to return to the DSC menu.
Adjusting the handset volume (handset optional)
The handset volume can be adjusted in stages from 1 to 8. This menu item will not be available unless the optional handset has been connected.
➮In the telephone mode, press OK.
The DSC menu will appear in the display. The cursor 
will mark Setup.
➮Press OK.
The Setup menu will appear in the display. The cursor 
will mark Volume.
➮Press OK.
➮Press 
to select Handset.
➮Press OK.
On the handset, you will hear the phone ring at the volume currently selected.
➮Press
/
or turn the volume control knob to select the desired volume.
➮Press OK.
You will return to the Volume menu.
➮Press CLR repeatedly until you return to the main menu or press and hold down CLR for longer than one second to return to the DSC menu.
Traffic announcements (TA) during hands-free operation
You can select whether you want traffic mes- sages to be put through or held back while you are using the phone.
➮In the telephone mode, press OK.
The DSC menu will appear in the display. The cursor 
will mark Setup.
➮Press OK.
➮Press 
to select TA / Call.
➮Press OK.
The TA DURING CALL menu will appear in the display.
➮Press 
to select the desired option On or Off.
➮Press OK.
If you have selected On, you must also se- lect the channel over which the traffic infor- mation will be emitted.
➮Press 
to make the desired setting Left or Right.
➮Press OK.
You will return to the Setup menu.
➮Press CLR repeatedly until you return to the main menu or press and hold down CLR for longer than one second to return to the DSC menu.
24
