USING THE TELEPHONE
Selecting the phone number from the list of last numbers dialed
The last numbers you dialed will automati- cally be stored on the SIM card. You can use this list to place calls to these numbers.
➮While the Radiophone is in telephone mode, press 
briefly.
The list with the numbers dialed last will ap- pear.
➮Use 
/
to select the desired number.
➮Press 
.
The Radiophone will now dial this number.
Selecting the phone number from the list of missed calls
Any calls you may have missed will be stored in a list. You can use this list to place calls to these numbers. These numbers will not be stored unless the caller has activated call line identification.
➮While the Radiophone is in telephone mode, press 
briefly.
The list indicating the numbers of the calls that have been missed will appear in the dis- play. If the caller’s number has been stored along with the name in the phone book, the corresponding name will appear in the dis- play.
➮Use 
/
to select the desired entry.
➮Press 
.
The Radiophone will now dial this number.
Selecting the phone number from the list of calls received
The calls you receive are also stored on a list. You can use this list to place calls to these numbers. These numbers will not be stored unless the caller has activated call line identi- fication.
➮While the Radiophone is in telephone mode, press 
briefly.
The list indicating the numbers of the calls that have been received will appear in the dis- play. If the caller’s number has been stored along with the name in the phone book, the corresponding name will appear in the dis- play.
➮Use 
/
to select the desired entry.
➮Press 
.
The Radiophone will now dial this number.
Deleting an entry from the incoming/ outgoing call list
➮Select the desired list (incoming/outgo- ing calls).
➮Use 
/
to select the desired entry.
➮Press
or
.
➮Confirm the following query with OK.
Deleting the incoming/outgoing call list
➮Select the desired list (incoming/outgo- ing calls).
➮Use 
/
to select the corresponding list (Redial list, Rec’d calls, Calls).
➮Press
or
➮Confirm the following query with OK.
Answering a call
Incoming calls are indicated by the ringing tone, the message Accept? in the display and the display will change colour.
If you want to accept the call,
➮press 
or
➮pick up the handset receiver (if con- nected).
Note:
It is possible to switch off the ringing tone. For more information, refer to the section on “Set- ting the ringing tone volume” in the chapter on “Basic functions”.
28
