Harman-Kardon HA160-0004-A manual System Control and Unit ID, Standby When this option is selected

Page 38

Signature 2.0

Advanced Setup

removed with the exception of the volume control. Thus, if the unit was in Standby when power was removed, it will return to Standby when power is restored. If the unit was On and in an operating condition when power was removed, it will turn on and resume operation when the power is restored. However, in this mode, the volume setting when the unit is restored will be the level set in the Turn On Vol settings shown above, not the actual volume setting in use when power was removed.

Standby: When this option is selected, the

2.0will go into the Standby mode when power is restored, regardless of the state it was in when power was removed. In this case, it will be necessary to turn the unit on by pressing the Standby Switch 2on the front panel or the Main Power Switch aon the remote if you wish to resume listening after a power interruption.

On: When this option is selected, the 2.0 will turn itself on when power is restored, regardless of the state of the unit when power is removed. Thus, if the unit was previously On, it will turn on again. However, if the unit was in the Standby mode when power was removed, it will turn on when power is restored. This option may be useful when optional, external power sense units are in use, or to make cer- tain that the 2.0 is turned on again should there be a power interruption during a VCR recording session. The volume setting used when the unit is turned on will be the setting for the Turn On Vol settings shown above, not the actual volume setting that may have been in use when power was removed.

Mute: When this option is selected, the 2.0 will turn itself on when power is restored, regardless of the state of the unit when power is removed. Thus, if the unit was previously On, it will turn on again.

However, if the unit was in the Standby mode when power was removed, it will turn on when power is restored. However, unlike the On setting, when Mute is selected, the volume will be muted when power is restored and the 2.0 is once again turned on. This option is useful to prevent unwanted system operation if the 2.0 is used for unattended VCR recording at late night hours, and you do not want

the unit to come up at a loud volume level should the power be removed and then restored.

To make a change in this option, press the Ü or Ý Menu Control buttons i until the desired setting is displayed. When you have completed the necessary change, press the Û Menu Control button i to enter the setting to the 2.0’s memory and move to the next step.

System Control and Unit ID

These settings help establish certain options for use when the 2.0 is controlled by an external computer system or a sophisticated remote control using RS-232 connections.

These settings are only used in complex installations, and are most often used by installers specially trained in their programming. In most instances, no adjustment is required to these settings, and you may toggle to the next set of commonly used controls by pressing the Û Menu Control button itwice until Display Options is highlighted to resume normal setup.

The System Control line details what capabilities are assigned to the rear panel RS-232 Control Port ¤.

The following options are available:

Lstn: In the “Listen” mode, the 2.0 will receive commands that are sent to it through the RS-232 port, but will not send out any commands of its own. Thus, it will react to incoming commands, but not originate any commands from the 2.0’s front panel or remote.

Talk: In the “Talk” mode, the 2.0 will echo all commands it generates through the RS-232 port, but it will not react to any incoming commands. Thus, it will send through any operational change to the 2.0 from the front panel buttons or remote, but it will not accept or react to any incoming commands.

L/Tk: In this mode, the 2.0 combines both of the functions described above. That is, it will both “Listen” to commands sent from an outside con- troller, and will “Talk” by sending out echoes of any command generated by the 2.0.

Off: When this option is selected, the 2.0’s rear panel RS-232 port is totally disabled, and it will neither accept nor send any commands.

34

Page 37 Page 39
Image 38
Page 37 Page 39
Contents HKSIG20 Page Signature 2.0 Processor/Tuner Staple or clip your original invoice here. Û Introduction Important Safety Information Typographic Conventions Unpacking and InstallationCleaning Moving The UnitEquipment Required for Quick-Start Installation Quick-Start InstructionsQuick Start Connection and Setup Quick StartQuick Start Instructions Operating Hints Front Panel Controls Standby LEDFront Panel Controls Rear Panel Connections ÞÝÜOptical Digital Audio Inputs Connect Remote Control Operation Volume VolumeMemorized Remote Control Operation Remote Control Operation Loading Batteries Remote Control ProgrammingRemote Control Range To change the batteriesProgrammable Keys TV, Vid 1, Vid 2, Vid 3, Tuner, CD, TapeResetting the Remote Memory Audio Inputs System InstallationInput Connections Video Inputs System and Accessory InputsOutput Connections Audio OutputsSystem Accessory Connections Record OutputsSpeaker Placement System ConfigurationSpeaker Selection and Placement Signature Series Ver Configuring Your SystemPower Off Standby TVVol Dolb y ProLo gic Speaker SetupSignature Series Power On Standby Figure OSD-3 Menu Control button i until Speaker DistancesSource Configuration Figure OSD-5Surround Mode Assignment Input AssignmentInput Level Adjust Video DetectSet Input Levels Input Level Ref Effects SetupInput Level EffectsBalance Balance 0 LF F/B 6 BAK Figure OSD-9Power-Up State Advanced SetupTurn-On Volume Standby When this option is selected, System Control and Unit IDDisplay Options Figure OSD-11Display Options Video Fmt Ntsc Figure FPD-7Turn On/Turn Off Volume Control and MuteOperating the Signature Volume Video Mute Dolby ProLogic01 90.7 FM Vol Source SelectionTuner Vol Stereo Surround Mode Change DVDVol Dolb y D i g italDirect Access Controls Treble CutBass Boost Subwoofer TrimBalance Center Channel AdjustSurround Adjust Display Status Report Figure OSD-24Tuner Operation Tuner and Frequency Band SelectionDirect Access Tuning Manual TuningFM Tuning Mode Selection 02 89.9 FM . VolPreset Tuning ÐÐ 90.7 FM . Vol 011004 91.5 FM . Vol RDS TuningRDS Display 04 91.5 FM05 102.7 FM Search RDS Program Type Search04 91.5 FM . Vol RDS ID Tuner Menu Figure OSD-33Station Naming and Personal Preferences Figure OSD-36Input Track Recording Simulcast OperationRecording Selectable Recording Figure OSD-38System Reset Troubleshooting GuideError Messages Digital Noise With DVD PlayersMenu Control button Troubleshooting Chart Symptom Possible Cause SolutionAdvanced Settings Factory PresetsSources Speaker Setup TunerSources User WorksheetsSoftware Version Surround Mode Definitions Dolby Pro LogicDolby Digital Mono Dolby DigitalDolby Digital Late Night DTS Movie ModesMono + MonoStereo TOP Top 40 Music RDS Data SystemProgram Type Program Type Name PTY Abbreviation Bass Boost Treble CutOutputs Signature 2.0 Processor/Tuner SpecificationsInputs Surround ModesGeneral Signal-To-Noise RatioTuner Section FM Description Subject Index Subject Index

HA160-0004-A specifications

The Harman-Kardon HA160-0004-A is a premium audio amplifier that epitomizes the brand's commitment to high-fidelity sound and innovative technology. This device is designed for audiophiles who demand exceptional performance and a rich listening experience, making it an excellent choice for both home theater systems and high-end audio setups.

One of the standout features of the HA160-0004-A is its power capability. The amplifier delivers an impressive output of 80 watts per channel, ensuring that even the most demanding speakers can perform efficiently without distortion. This power is complemented by a carefully designed Class AB amplification architecture, which combines the benefits of both Class A and Class B designs. The result is a warm, natural sound with a high level of detail across the audio spectrum.

The HA160-0004-A supports a wide range of audio formats and input options, making it versatile for any home audio system. It is equipped with multiple analog inputs, including RCA and balanced XLR inputs, allowing users to connect various audio sources seamlessly. Additionally, it includes digital audio inputs such as optical and coaxial, accommodating modern digital audio playback devices. Users can easily switch between sources using the intuitive front panel or remote control.

Harman-Kardon's commitment to sound quality is further exemplified by the use of high-quality components within the HA160-0004-A. The amplifier features advanced circuitry designed to minimize noise and distortion, which is crucial for preserving the integrity of the audio signal. This results in a clear and dynamic sound, whether listening to music, watching movies, or gaming.

Another noteworthy characteristic of the HA160-0004-A is its sleek, elegant design. The chassis is built with high-quality materials, showcasing a clean aesthetic that will complement any modern audio setup. The front panel features a user-friendly layout with an illuminated display, making it easy to monitor input selections and volume levels.

Additionally, the HA160-0004-A is engineered for durability and longevity, with robust construction that allows it to withstand regular use over time. This amplifier is not only a powerful audio device but also an appealing centerpiece for your entertainment space.

In conclusion, the Harman-Kardon HA160-0004-A amplifier represents a blend of performance, versatility, and style. With its powerful output, advanced technologies, and elegant design, it is well-suited for audiophiles and casual listeners alike, ensuring a superior audio experience across various applications.
Top Page Image Contents