Brother 342Fi, BAS-341F, BAS-342F instruction manual Using the Operation Panel, Explanation of panel

Page 22

6. USING THE OPERATION PANEL

6. USING THE OPERATION PANEL

6-1. Explanation of panel

						(5)	(1)
			(7)
(2)			(8)
			(8)
(3)		(9)
(3)
		(10)
			(11)
(4)

		(6)						1207S
								1207S

(1) POWER indicator		When the power is turned on, the indicator lights to show that the power is on.
(2) PROGRAM No. display		Displays the program number 00 - 99.
(3) Program select switch		Used to select the program number when reading a program from or writing a
		program to disk.
(4) Program Read/Write switch		Used to read a program from floppy disk, or to write a newly programmed stitch
		pattern to floppy disk.
		Up to ten patterns (00 - 99) can be stored on each disk.
(5) Display screen		Used to display data such as menus, errors and memory switch settings.
(6) Menu switch		Used to select the desired menu (scale, speed, bobbin thread counter, split No.).
		One of the indicators (7) - (11) illuminates to indicate the menu selected, and the
		setting for that menu them appears on the display screen (5).
		The illuminated indicator changes in the following order each time the switch is
		pressed.
		X-SCALE indicator (7)			Y-SCALE indicator (8)		SPEED indicator (9)
		B.T. COUNTER indicator (10)				SPLIT NO. indicator (11)
(7) X-SCALE indicator		Illuminates when X-scale mode has been selected using the menu switch (6).
(8) Y-SCALE indicator		Illuminates when Y-scale mode has been selected using the menu switch (6).
(9) SPEED indicator		Illuminates when speed mode has been selected using the menu switch (6).

15

BAS-341F,342F

Image 22

Contents BAS-341F BAS-342F Safety Instructions Safety indications and their meaningsInstallation Environmental requirementsMaintenance and inspection CleaningSewing 1971S Contents Changing Special Functions BAS-341F Name of Each PartsBAS-342F Specifications NeedleBefore setting up PreparationPositioning Tilting the sewing machine headInstalling the foot switch Connecting the ground wireBelt tension Installing the spool stand Installing the programmer optionAdjusting the air pressure Lubrication Lubrication pointsSelecting the needle and thread Installing the needle and running the sewing machineCorrect USE To turn the pulley by handThreading the upper thread Winding the lower thread Replacing the bobbin case and threading the thread Sewing conditions and thread tensionLower thread tension Upper thread tension Pretension tension Using the Operation Panel Explanation of panelIndicator Switch Using the floppy disk Compatible types of floppy diskSetting the floppy disk How to use the cleaning diskClearing the error Using the program R/W Read/Write switchIf an error message is displayed To Read a pattern to memoryUsing the Test switch Checking the sewing pattern Resuming operation from a stopping poingUsing the emergency stop switch Continuing sewing from a stopping pointAdjusting the sewing Speed control Changing the X-SCALE and Y-SCALE settingsUsing the bobbin thread counter Using production counter Using single split mode Shifting a stitch pattern Before starting sewing SewingSewing operation 1942S Cleaning the shuttle hook Maintenance and InspectionLubrication Cleaning the control box air inlet port Draining the oilCleaning the eye guard Checking the needleAdjusting the needle bar height Adjusting the needle bar lift amountAdjusting the driver needle guard Adjusting the needle clearanceAdjusting the shuttle race thread guide Adjusting the movable knife Replacing the movable and fixed knivesMovable knife Presser foot adjustment Changing the presser foot lift Adjusting presser foot lift to 3 5mmAdjusting presser foot lift to 5 8 mm Standard presser foot lift is 3 mm max mmAdjusting the wiper Adjusting the needle up stop positionChecking the input sensor and DIP switch input Clearing all memory settings Checking the input voltageDIP Switch Panel DIP switch functionsFeeding speed is switched to high speed DIP switches inside the control box DIP Switch Changing Special Functions and Using the Memory Switches Memory switches 00 0F Switch No When on Memo-10 Memory switches 20 2F Extended option outputSwitch No Possible Units Error Codes Error codes E.9 * E.F Gauge Parts List According to Subclasses Plate blank Troubleshooting Incorrect needle and shuttle hook timing Turn the sub-tension nut To adjust the tension Adjust the sub tension Sharpen or Replace Fixed knife Option Needle thread presser deviceAir wiper device 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone