Brother BAS-342F, BAS-341F, 342Fi instruction manual Feeding speed is switched to high speed

Page 49

10. DIP SWITCH

DIP switch A

SW No.

When ON

	A-5	After sewing is completed, work clamp does not automatically rise (only in split mode)

	A-6	Clamping force output is produced (Inner clamping device available as an option)

	A-7	Single-pedal operation using the starting switch; when the starting switch is pressed, the work clamp
	A-7	drops, and when it is released, sewing starts.
		drops, and when it is released, sewing starts.

	A-8	Thread breakage detector device is activated

DIP switch B

SW No.

When ON

	B-1	Single split mode activated

	B-2	Feed movement when not using work clamp, activated

	B-3	Thread is not trimmed after an emergency stop.

	B-4	Needle cooler output is produced.

	B-5	When a rotating-type thread breakage detector device is used, detection precision is increased from 8 to 14.
	B-5	When a fiber-type thread breakage detector device is used, detection precision is increased from 5 to 10.


	B-6	Fiber-type thread breakage detector device is ON, and DIP switch A - 8 is ON (available as an option)

	B-7	When using a 3-stage pedal
	B-7	If DIP switch A -2 is ON at the same time, the presser foot will drop at the same time that work clamp drop.


	B-8	Feeding speed is switched to high speed.

BAS-341F, 342F

42

Image 49

Contents BAS-341F BAS-342F Safety indications and their meanings Safety InstructionsEnvironmental requirements InstallationMaintenance and inspection CleaningSewing 1971S Contents Changing Special Functions BAS-341F Name of Each PartsBAS-342F Needle SpecificationsPreparation Before setting upTilting the sewing machine head PositioningInstalling the foot switch Connecting the ground wireBelt tension Installing the programmer option Installing the spool standAdjusting the air pressure Lubrication points LubricationCorrect USE Installing the needle and running the sewing machineSelecting the needle and thread To turn the pulley by handThreading the upper thread Winding the lower thread Sewing conditions and thread tension Replacing the bobbin case and threading the threadLower thread tension Upper thread tension Pretension tension Explanation of panel Using the Operation PanelIndicator Switch Compatible types of floppy disk Using the floppy diskHow to use the cleaning disk Setting the floppy diskIf an error message is displayed Using the program R/W Read/Write switchClearing the error To Read a pattern to memoryResuming operation from a stopping poing Using the Test switch Checking the sewing patternContinuing sewing from a stopping point Using the emergency stop switchChanging the X-SCALE and Y-SCALE settings Adjusting the sewing Speed controlUsing the bobbin thread counter Using production counter Using single split mode Shifting a stitch pattern Before starting sewing SewingSewing operation 1942S Cleaning the shuttle hook Maintenance and InspectionLubrication Draining the oil Cleaning the control box air inlet portChecking the needle Cleaning the eye guardAdjusting the needle bar lift amount Adjusting the needle bar heightAdjusting the driver needle guard Adjusting the needle clearanceAdjusting the shuttle race thread guide Replacing the movable and fixed knives Adjusting the movable knifeMovable knife Presser foot adjustment Adjusting presser foot lift to 5 8 mm Adjusting presser foot lift to 3 5mmChanging the presser foot lift Standard presser foot lift is 3 mm max mmAdjusting the needle up stop position Adjusting the wiper Checking the input sensor and DIP switch input Checking the input voltage Clearing all memory settingsPanel DIP switch functions DIP SwitchFeeding speed is switched to high speed DIP switches inside the control box DIP Switch Changing Special Functions and Using the Memory Switches Memory switches 00 0F Switch No When on Memo-10 Extended option output Memory switches 20 2FSwitch No Possible Units Error Codes Error codes E.9 * E.F Gauge Parts List According to Subclasses Plate blank Troubleshooting Incorrect needle and shuttle hook timing Turn the sub-tension nut To adjust the tension Adjust the sub tension Sharpen or Replace Fixed knife Needle thread presser device OptionAir wiper device 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone