Brother BAS-342F, BAS-341F, 342Fi, PROGRAMMABLE ELECTRONIC PATTERN SEWER Memory switches 00 0F

Page 53

11. CHANGING SPECIAL FUNCTION AND USING THE MEMORY SWITCHES

Memory switches (00 - 0F)

Switch No.

 

 

When ON

 

 

 

 

 

memo-00

When moving to the home position, the feed plate moves in the order X

Y and the start position

moves in the order Y

X.

 

 

 

 

 

memo-01

When moving to the home position, the feed plate moves in the order Y

X and the start position

moves in the order X

Y.

 

 

 

 

 

 

The forward position becomes the home position, and movement is in the order Y

X and

memo-02

X

Y.

 

 

 

 

Use when there is an obstacle at the center of the work clamp.

 

 

memo-03

Eject device operates. (Eject device is available by special order.)

 

 

 

 

memo-04

Needle stops in up position during emergency stop. (Needle normally stops in down position.)

 

 

memo-05

When sewing is finished, the feed plate moves via the machine home position to the start position.

 

 

memo-06

After the final stitch, the work clamp rises and then the feed plate returns to the start position.

 

 

 

 

memo-07

Intermittent work clamp is not used (does not rise).

 

 

 

 

memo-08

When using an inner clamping device, the clamping presser is ON for 1/4 and OFF for 3/4 of the

pattern. (Inner clamping device is available as an option.)

 

 

 

 

 

memo-09

Changes the wiper to air drive. (Air wiper is availabe as an option.)

 

 

 

 

 

 

memo-0A

Jog feeding becomes faster during programming.

 

 

 

 

memo-0b

ON when a two-stage tensioner is used. (Two-stage tensioner is available as an option.)

 

 

memo-0c

Single-pedal operation by means of two-stage work clamp switches. DIP switch A-2 is ON

 

 

memo-0d

Clearing the emergency stop switch action is carried out using the STEP BACK switch.

 

 

memo-0E

Test feeding is carried out at the same speed as normal sewing. (For checking feed operation)

 

 

memo-0F

After sewing is finished, the work clamp automatically opens and closes once. (practice operation)

If memo-0E is ON, the work clamp opens and closes twice.

 

 

 

 

 

BAS-341F, 342F

46

Page 52 Page 54
Image 53
Page 52 Page 54
Contents BAS-341F BAS-342F Safety indications and their meanings Safety InstructionsEnvironmental requirements InstallationSewing CleaningMaintenance and inspection 1971S Contents Changing Special Functions BAS-342F Name of Each PartsBAS-341F Needle SpecificationsPreparation Before setting upTilting the sewing machine head PositioningBelt tension Connecting the ground wireInstalling the foot switch Installing the programmer option Installing the spool standAdjusting the air pressure Lubrication points LubricationCorrect USE Installing the needle and running the sewing machineSelecting the needle and thread To turn the pulley by handThreading the upper thread Winding the lower thread Sewing conditions and thread tension Replacing the bobbin case and threading the threadLower thread tension Upper thread tension Pretension tension Explanation of panel Using the Operation PanelIndicator Switch Compatible types of floppy disk Using the floppy diskHow to use the cleaning disk Setting the floppy diskIf an error message is displayed Using the program R/W Read/Write switchClearing the error To Read a pattern to memoryResuming operation from a stopping poing Using the Test switch Checking the sewing patternContinuing sewing from a stopping point Using the emergency stop switchChanging the X-SCALE and Y-SCALE settings Adjusting the sewing Speed controlUsing the bobbin thread counter Using production counter Using single split mode Shifting a stitch pattern Sewing operation SewingBefore starting sewing 1942S Lubrication Maintenance and InspectionCleaning the shuttle hook Draining the oil Cleaning the control box air inlet portChecking the needle Cleaning the eye guardAdjusting the needle bar lift amount Adjusting the needle bar heightAdjusting the shuttle race thread guide Adjusting the needle clearanceAdjusting the driver needle guard Replacing the movable and fixed knives Adjusting the movable knifeMovable knife Presser foot adjustment Adjusting presser foot lift to 5 8 mm Adjusting presser foot lift to 3 5mmChanging the presser foot lift Standard presser foot lift is 3 mm max mmAdjusting the needle up stop position Adjusting the wiperChecking the input sensor and DIP switch input Checking the input voltage Clearing all memory settingsPanel DIP switch functions DIP SwitchFeeding speed is switched to high speed DIP switches inside the control box DIP Switch Changing Special Functions and Using the Memory Switches Memory switches 00 0F Switch No When on Memo-10 Extended option output Memory switches 20 2FSwitch No Possible Units Error Codes Error codes E.9 * E.F Gauge Parts List According to Subclasses Plate blank Troubleshooting Incorrect needle and shuttle hook timing Turn the sub-tension nut To adjust the tension Adjust the sub tension Sharpen or Replace Fixed knife Needle thread presser device OptionAir wiper device 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone

342Fi, BAS-341F, PROGRAMMABLE ELECTRONIC PATTERN SEWER, BAS-342F specifications

The Brother BAS-342F programmable electronic pattern sewer represents an innovative approach in the textile and garment manufacturing industry. This machine is designed to enhance productivity and precision in creating intricate designs and patterns on various fabrics. The BAS-342F, along with its counterparts BAS-341F and BAS-342i, integrates cutting-edge technology, making it ideal for both small-scale tailoring operations and large-scale manufacturing environments.

One of the main features of the BAS-342F is its electronic pattern programming capability. This allows operators to store and recall multiple sewing patterns and designs with ease. The machine's advanced digital control system facilitates quick changes between patterns, drastically reducing downtime. Users can program complex designs directly on the machine or through external devices, ensuring flexibility in production.

The BAS-342F is equipped with a high-speed sewing capability, reaching up to 5,000 stitches per minute. This high output is significant for businesses looking to optimize efficiency and meet production demands while maintaining quality. The model also incorporates automatic thread trimming and thread break detection systems, ensuring consistent results with minimal manual intervention.

In terms of user experience, the machine features an intuitive interface, making it accessible even for beginners. The digital display provides clear visibility of settings and adjustments, allowing for precise control over the sewing process. Ergonomically designed controls contribute to ease of use, ensuring operators can work efficiently without experiencing fatigue.

Moreover, the Brother BAS-342F utilizes a robust industrial-grade construction that guarantees durability and reliability in demanding manufacturing environments. Its versatility allows it to handle a variety of materials, from lightweight fabrics to heavier textiles, expanding its usability across different sewing applications.

Another key characteristic is the machine’s compatibility with various attachments and accessories, enabling users to enhance its capabilities further. Optional features might include specialized feet for more delicate fabrics or additional pattern options that can be integrated into the existing programming.

Overall, the Brother BAS-342F, along with its siblings, stands out for its combination of high speed, programmable functionality, and user-friendly design. As the fashion industry continues to evolve, machines like the BAS-342F play a crucial role in meeting the demands for creativity, efficiency, and quality in garment production. Investing in such advanced technology not only boosts productivity but also opens new avenues for creative expression in design.
Top Page Image Contents