CONTENTS | |
1. NAME OF MAJOR PARTS | 1 |
2. SPECIFICATIONS | 2 |
3. PREPARATION | 3 |
3-1. Before setting up | 3 |
3-2. Positioning | 4 |
3-3. Tilting the sewing machine head | 4 |
3-4. Connecting the ground wire | 5 |
3-5.V-belt tension | 5 |
3-6. Installing the foot switch | 5 |
3-7. Installing the spool stand | 6 |
3-8. Installing the programmer (option) | 6 |
3-9. Adjusting the air pressure | 7 |
4. LUBRICATION | 8 |
4-1. Lubrication points | 8 |
5. CORRECT USE | 9 |
5-1. Selecting the needle and thread | 9 |
5-2. Installing the needle and urnning the sewing machine | 9 |
5-3. Threading the upper thread | 10 |
5-4. Winding the lower thread | 11 |
5-5. Replacing the bobbin case and threading the thread | 12 |
5-6. Sewing conditions and thread tension | 12 |
5-6-1. Sewing conditions | 12 |
5-6-2. Lower thread tension | 13 |
5-6-3. Upper thread tension | 13 |
5-6-4. Thread take-up spring height | 13 |
5-6-5. Thread take-up spring tension | 13 |
5-6-6. Pretension tension | 14 |
6. USING THE OPERATION PANEL | 15 |
6-1. Explanation of panel | 15 |
6-2. Using the floppy disk | 17 |
6-3. Using the program R/W (Read/Write) switch | 19 |
6-4. Using the TEST switch (Checking the sewing pattern) | 20 |
6-5. Using the emergency stop switch | 21 |
6-6. Adjusting the sewing SPEED control | 22 |
6-7. Changing the X-SCALE and Y-SCALE settings | 22 |
6-8. Using the bobbin thread counter | 23 |
6-9. Using production counter | 24 |
6-10. Using single split mode | 25 |
6-11. Shifting a stitch pattern | 26 |