Kenmore 625.38376 owner manual Tank Light, Water Flow Through the Softener, COl, Lo M, Lowratei

4. PressSELECT1to showthe97%Feature.

97% Feature: The 97% Feature can save salt and water by regenerating when 97% of the softener's capacity has been used up. With this feature ON, the regeneration can occur at any time (whenever the sys- tem has reached 97% of its capacity). The default is OFF. If this feature is desired, turn it on by pressing the UP button.

IntelliSoft is a new Kenmore exclusive technology built into your system's electronic control. IntelliSoft ensures that your softening system provides you with the most accurate salt dose to fit your water use needs, providing you with industry leading water and salt savings.

,Press SFLECT1 to show the 12 HOUR display.

12 or 24 hour clock: All time displays are shown in standard clock time (1 to 12 PM; and 1 to 12 AM) at the 12 hr default setting. If Military time displays are desired, set to 24 hr by pressing the UP button.

,Press SELECT1 to show the GALLONS or LITERS dis- play.

Gallon or Liter readings: Water usage and flow dis- plays are shown in gallons. If you prefer to have the

same displays in liters, press the UP button until Liter shows.

,Press SELECT1 to show the RECHARGE display.

Maximum days between regenerations: The faceplate timer automatically controls regeneration frequency (see page 28). This provides the greatest operating efficien- cy, and under most conditions, this feature will be left in its default mode. However, modify this feature if you want to force a regeneration every set number of days. For example, if your water supply contains iron and you want the softener to regenerate at least once every few days to keep the resin bed clean, set the display as typi- cally shown above. Setting is available from 1 to 15 days by using the UP and DOWN buttons.

8. Press SELECT 1 to return the present time display.

TANK LIGHT

To light the inside of the salt storage tank, press the TANK LIGHT button on the faceplate. Press the same button again to turn the light off, or it will turn off automatically in 4 minutes.

WATER FLOW THROUGH THE SOFTENER

To view the gallon (or liter) per minute water flow rate through the softener, if not already displayed, press the SELECT 2 button. If soft water is being used, the flow rate to the closest 1/10 gallon (or liters) shows. If all faucets

and water using appliances are off, the display will show 0 flow.

	LI !--I--		"-I I
	RECHARGE		RECHARGE
l i	n,-,-	i	'-'-'

FIG. 39

		_ME		_		_ME
				l '	2'41-,,-
						FIG. 40
l_ i	COl	i-		I_	I, :E,-
-_-	-	GALLONS		- -		LITERS
						FIG. 41
8		DAY		8		DAY
	RECHARGE		j	_	RECHARGE	:
_J__				J__
	Default Display				Example:

Set to 4 Days Maximum

Between Regeneration

FIG. 42

'LO _M

FIG. 43

i --5%:,

--_-- 7,1]kq_,1 _,o I

_j__ _LOWRATEI

FIG. 44

Questions? Call The Kenmore Water Line 1-800-426-9345

24