Harman-Kardon DPR 1001 Front Panel Connections, Output Level Trim Adjustment, Memory Backup

Page 29

OPERATION

Front Panel Connections

In addition to rear-panel outputs, the DPR 1001 offers Harman Kardon’s exclusive configurable front panel output jack feature. You may switch the front panel Digital Coax Jack Ò or the Video 4 Jacks Ú from an input to an output by following these steps:

1.Press the OSD Button 31 to view the MAIN menu (Figure 1).

2.Press the Set Button p to enter the IN/OUT SETUP menu (Figure 2).

3.Press the ¤ Navigation Button n so that VIDEO 4 or COAXIAL 3 is highlighted in reverse video, depending on which input you wish to change to an output. Either input or both may be changed at any time.

4.Press the Set Button p and then press either of the ‹/› Navigation Buttons n so that the word OUT appears.

5.Press the Set Button p to enter the change.

6.Press the OSD Button 31 to exit the menus and return to normal operation.

Once the setting is made, the appropriate Input/ Output Status Indicator will turn red, indicating that the selected analog or digital jacks are now an output, instead of in the default setting as an input. Once changed to an output, the setting will remain as long as the DPR 1001 is turned on, unless the setting is changed in the OSD menu system, as described above. However once the DPR 1001 is turned off, the setting is cancelled. When the unit is turned on again, the front panel jacks will return to their normal default setting as an input. If you wish to use these jacks as an output at a future time, the setting must be changed again using the OSD menu system, as described above.

Output Level Trim Adjustment

Normal output level adjustment for the DPR 1001 is established using the test tone, as outlined on pages 22 and 23. In some cases, however, it may be desir- able to adjust the output levels using program material such as a test disc, or a selection you are familiar with. Additionally, the output level for the subwoofer can only be adjusted using this procedure.

When adjusting channel output levels, the EzSet remote may be used to serve as an SPL meter so that levels may be set more accurately. To use the remote in its manual mode for this purpose, follow the instruc- tions shown on page 23.

To adjust the output levels using program material, first set the reference volume for the front left and front right channels using the Volume Control $rî.

To adjust the channel output levels using an external source from the remote, press the Channel Select Button m; the on-screen display and the Lower Display Line B will read FRONT L LEVEL, indicating that the Front Left channel is ready for adjustment. To trim the level, press the Set Button

pand then use the ⁄/¤ Navigation Buttons n to make the adjustment. When the correct level has been reached, press the Set Button p to enter the setting and then press the ⁄/¤ Navigation Buttons n to select the next channel to be adjust- ed. Repeat the procedure for any channels that need adjustment, remembering that the goal is to have all channels deliver sound at the same level.

To adjust the channel output levels using an external source from the front panel, first press the Set Button !. Within five seconds press the ⁄/¤ Navigation Buttons )@ until CHANNEL MODE appears in the on-screen display and the Lower Display Line B; an amber LED will also light next to CHANNEL in the System Configuration Indicators %. Within five seconds press the Set Button ! again and the on-screen display and the Lower Display Line B will change to FRONT L LEVEL, indicating that the Front Left channel is ready for adjustment. To trim the level, press the Set Button ! and then use ⁄ / ¤ Navigation Buttons )@ to make the adjustment. When the correct level has been reached, press the Set Button !

to enter the setting and then press the ⁄ / ¤ Navigation Buttons )@ to select the next chan- nel to be adjusted. Repeat the procedure for any chan- nels that need adjustment, remembering that the goal is to have all channels deliver sound at the same level.

The channel output for any input may also be adjusted using the full-OSD on-screen menu system. Press the OSD Button 31 to bring up the MAIN menu (Figure 1). Press the ¤ Navigation Button n until the CHANNEL ADJUST line is highlighted in reverse video. Press the Set Button p to activate the CHANNEL ADJUST menu (Figure 11).

Once the menu appears on your video screen, use the

⁄/ ¤ Navigation Buttons n to select the chan- nels to be adjusted. At each channel position use the ‹/› Navigation Buttons n to change the output level. Remember, the goal is to have the output level at each channel sound equal when heard at the listening position.

If you wish to reset all the levels to their original factory default of 0dB offset, press the ⁄ / ¤ Navigation Buttons n so that the CHANNEL RESET line is highlighted in reverse video and press the ‹/› Navigation Buttons n so that the word ON appears. After the levels are reset, resume the proce- dure outlined above to adjust the levels to the desired settings. When all adjustments are done, press the

⁄/ ¤ Navigation Buttons n until RETURN TO MAIN MENU is highlighted in reverse video and then press the Set Button p if you wish to go back to the main menu to make other adjustments.

If you have no other adjustments to make, press the OSD Button 31 to exit the menu system.

NOTE: The output levels may be separately trimmed for each digital and analog surround mode. If you wish to have different trim levels for a specific mode, select that mode and then repeat the instructions in this section.

6-Channel/8-Channel Direct Input

The DPR 1001 is equipped for future expansion through the use of optional, external adapters for for- mats that the DPR 1001 may not be capable of pro- cessing or to allow connection to the output of high- resolution optical audio playback systems such as DVD-Audio or SACD. When a device with six-channel outputs (5.1 audio) is used, connect the source device to the 6-Channel Direct Inputs 33 . When a device with eight-channel outputs (7.1) audio is used, connect the additional Surround Back Left (SBL) and Surround Back Right (SBR) outputs to the 8-Channel Direct Inputs 34 on the DPR 1001. To select these inputs, press the 6-Channel/8-Channel Input Select Button 43 on the remote.

When the 6-Channel or 8-Channel Direct Input is in use, you may not select a surround mode, as the external decoder determines the processing in use. In addition, there is no signal at the record outputs when the 6-Channel or 8-Channel Direct Input is in use.

Memory Backup

This product is equipped with a memory backup system that preserves the system configuration information and tuner presets if the unit is accidentally unplugged or subjected to a power outage. This memory will last for approximately two weeks, after which time all information must be reentered.

OPERATION 29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DPR DPR 1001 Digital Path Receiver Table of ContentsHigh-bandwidth, HDTV-compatible compo- nent video switching Description and FeaturesIntroduction Modèle pour les CanadienUnpacking Safety InformationImportant Safety Information Surround Mode Selector Power Indicator will turn green when the unit is onSystem Configuration Indicators Front Panel ControlsFront Panel Controls Front Panel Information Display Lower Display Line OSD Indicator Upper Display LineFront Left White Rear Panel ConnectionsFront Right Red Center Green34 8-Channel Direct Inputs When an optional 33 6-Channel Direct Inputs When an optionalProgram Button Main Remote Control FunctionsSPL Select Button EzSet Microphone Sensor Lens DPRTuning Mode Press this button when the tuner DSP Surround Mode Selector Press thisSee page 29 for more information Seven-channel Stereo, depending on the speaker configurationZone II Remote Control Functions System Installation Installation and ConnectionsSystem and Power Connections Speaker Placement System ConfigurationSpeaker Selection and Placement System SetupSetting the System Configuration Memory Using the On-Screen DisplayMaking Configuration Adjustments Input Setup Or 6.1-channel sound field To move the highlighted video to Surr When all crossover settings have been made, or T S P K R L E V E L S S E T Additional Input Adjustments Manual Output Level AdjustmentOperation Remote Control OperationBasic Operation Source SelectionSurround Mode Selection Volume ControlDigital Audio Playback Dolby DigitalSurround Mode Chart Night Mode Digital Status IndicatorsSelecting a Digital Source From pRecording Tuner OperationMemory Backup Output Level Trim AdjustmentFront Panel Connections Channel/8-Channel Direct InputTurn-On Volume Level Advanced FeaturesSurround Back Amplifier Assignment Display BrightnessMultiroom Operation Multiroom SetupMultiroom Operation Configuring the RemotePreprogrammed Code Entry Remote’s Main Menu messageAutomatic Code Entry Learning Commands Macro Programming Reassigning the commands used for a particular deviceChanging Devices Power On VID 2/TV VID 3/Cable AVR Logic 7 Sent when the Power button is pressedMacro. The choices are the Power On Button Programmed e.g., the Power On Button 1 orRead a Macro Punch-Through ConfigurationReturning the Volume Control Settings to Default Operation Returning the Channel Control Settings to Default Operation Will remain illuminated in red. Press EzSet ConfigurationRenaming Numeric Keys Bottom line of the display, as shown in FigureButton Next characterAt this point you have two options Resetting the RemoteAdditional Notes on Configuring and Operating the Remote Processor Reset Troubleshooting GuideDesired output signal From DTS or Dolby Digital DVDsDPR 1001 Technical Specifications
Related manuals
Manual 4 pages 27.76 Kb

DPR 1001 specifications

The Harman-Kardon DPR 1001 is an impressive addition to the realm of home audio equipment, primarily recognized for its advanced features and high-quality sound reproduction. This product blends the best of both stereo and multichannel audio, allowing users to enjoy a versatile listening experience.

One of the most notable features of the DPR 1001 is its ability to deliver true surround sound. With a 6-channel amplifier rated at 50 watts per channel, the unit offers enough power to fill a medium-sized room with rich, clear audio. Its unique Digital Power Processing technology allows for efficient power management while maintaining high audio fidelity. This technology ensures that the amplifier operates with minimal distortion, even at higher volume levels.

The AVR also boasts a smart user interface, designed to enhance usability. Its intuitive layout makes navigation straightforward, even for those less familiar with home theater systems. The remote control offers seamless access to various sound modes and settings; users can easily switch between movie and music modes, catering to different listening preferences.

Connectivity is another strong suit of the DPR 1001. It supports multiple inputs, including optical and digital coaxial connections, allowing users to connect various audio sources such as Blu-ray players, gaming consoles, and streaming devices. Additionally, the inclusion of composite and component video outputs ensures compatibility with older TVs and projectors, making it a versatile option for any home setup.

Further enhancing its appeal, the DPR 1001 integrates Dolby Digital and DTS processing technologies, enabling an authentic cinematic experience. With the ability to decode these formats, it transforms your living room into a theater-like atmosphere, perfect for movie nights or gaming marathons.

When it comes to build quality, Harman-Kardon maintains its reputation with a sleek and durable construction. The unit’s design not only looks good but also optimizes acoustics, ensuring crystal-clear sound reproduction.

Overall, the Harman-Kardon DPR 1001 stands out for its powerful performance, advanced audio technologies, and user-friendly features. Whether you are an audiophile or simply looking to enhance your home entertainment system, this receiver is a compelling choice that will elevate your audio experience.
Top Page Image Contents