Harman-Kardon DPR 1001 owner manual Front Panel Information Display

Page 7

FRONT PANEL INFORMATION DISPLAY

FE

A

B

C

D

A Bitstream Indicators

C Multiroom Indicator

E Speaker/Channel Input Indicators

B Lower Display Line

D OSD Indicator

F Upper Display Line

 

NOTE: To make it easier to follow the installation instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section at www.harmankardon.com.

ABitstream Indicators: When a digital input is playing, one of these indicators will light to display the type of data signal in use.

BLower Display Line: Depending on the receiver’s status, a variety of messages will appear here. In normal operation, the current surround mode name will appear on this line.

CMultiroom Indicator: This indicator lights when the multiroom system is active. Note that it will remain lit when the multiroom system is in use even when the main room system is in the Standby mode and all other indicators are dark. (See page 31 for more information on the Multiroom system.)

DOSD Indicator: When the OSD system is in use, this indicator lights to remind you that the other indica- tors in this display do not function when the On-Screen Display is being used.

ESpeaker/Channel Input Indicators: These indica- tors are multipurpose, indicating either the speaker type selected for each channel or the number of channels available from the input source. The left, center, right, surround and surround back speaker indicators are composed of overlapping ovals, while the subwoofer is

represented by a single box labeled “LFE”. The center oval lights when a “Small” speaker is selected, and the outer oval lights when “Large” speakers are selected.

When none of the indicators are lit for a specific chan- nel, no speaker has been selected at that position. (See page 19 for more information on configuring speakers.) The indicators are positioned to correspond to the input channels. For standard analog inputs, only the top left and right indicators will light, indicating a stereo input. When a digital source is playing, the indicators will light to display the channels being received at the digital input. When the indicators flash, the digital input has been interrupted.

FUpper Display Line: Depending on the receiver’s status, a variety of messages will appear here. In normal operation, the current input source information will appear on this line, including the input name and an indication as to analog audio or one of the optical or coax digital audio inputs.

FRONT PANEL INFORMATION DISPLAY 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DPR DPR 1001 Digital Path Receiver Table of ContentsModèle pour les Canadien Description and FeaturesHigh-bandwidth, HDTV-compatible compo- nent video switching IntroductionImportant Safety Information Safety InformationUnpacking Front Panel Controls Power Indicator will turn green when the unit is onSurround Mode Selector System Configuration IndicatorsFront Panel Controls Front Panel Information Display Lower Display Line OSD Indicator Upper Display LineCenter Green Rear Panel ConnectionsFront Left White Front Right Red34 8-Channel Direct Inputs When an optional 33 6-Channel Direct Inputs When an optionalDPR Main Remote Control FunctionsProgram Button SPL Select Button EzSet Microphone Sensor LensTuning Mode Press this button when the tuner DSP Surround Mode Selector Press thisSee page 29 for more information Seven-channel Stereo, depending on the speaker configurationZone II Remote Control Functions System Installation Installation and ConnectionsSystem and Power Connections System Setup System ConfigurationSpeaker Placement Speaker Selection and PlacementMaking Configuration Adjustments Using the On-Screen DisplaySetting the System Configuration Memory Input Setup Or 6.1-channel sound field To move the highlighted video to Surr When all crossover settings have been made, or T S P K R L E V E L S S E T Additional Input Adjustments Manual Output Level AdjustmentSource Selection Remote Control OperationOperation Basic OperationDolby Digital Volume ControlSurround Mode Selection Digital Audio PlaybackSurround Mode Chart From p Digital Status IndicatorsNight Mode Selecting a Digital SourceRecording Tuner OperationChannel/8-Channel Direct Input Output Level Trim AdjustmentMemory Backup Front Panel ConnectionsDisplay Brightness Advanced FeaturesTurn-On Volume Level Surround Back Amplifier AssignmentMultiroom Operation Multiroom SetupRemote’s Main Menu message Configuring the RemoteMultiroom Operation Preprogrammed Code EntryAutomatic Code Entry Learning Commands Changing Devices Reassigning the commands used for a particular deviceMacro Programming Programmed e.g., the Power On Button 1 or Sent when the Power button is pressedPower On VID 2/TV VID 3/Cable AVR Logic 7 Macro. The choices are the Power On ButtonReturning the Volume Control Settings to Default Operation Punch-Through ConfigurationRead a Macro Returning the Channel Control Settings to Default Operation Renaming EzSet ConfigurationWill remain illuminated in red. Press Next character Bottom line of the display, as shown in FigureNumeric Keys ButtonAdditional Notes on Configuring and Operating the Remote Resetting the RemoteAt this point you have two options From DTS or Dolby Digital DVDs Troubleshooting GuideProcessor Reset Desired output signalDPR 1001 Technical Specifications
Related manuals
Manual 4 pages 27.76 Kb

DPR 1001 specifications

The Harman-Kardon DPR 1001 is an impressive addition to the realm of home audio equipment, primarily recognized for its advanced features and high-quality sound reproduction. This product blends the best of both stereo and multichannel audio, allowing users to enjoy a versatile listening experience.

One of the most notable features of the DPR 1001 is its ability to deliver true surround sound. With a 6-channel amplifier rated at 50 watts per channel, the unit offers enough power to fill a medium-sized room with rich, clear audio. Its unique Digital Power Processing technology allows for efficient power management while maintaining high audio fidelity. This technology ensures that the amplifier operates with minimal distortion, even at higher volume levels.

The AVR also boasts a smart user interface, designed to enhance usability. Its intuitive layout makes navigation straightforward, even for those less familiar with home theater systems. The remote control offers seamless access to various sound modes and settings; users can easily switch between movie and music modes, catering to different listening preferences.

Connectivity is another strong suit of the DPR 1001. It supports multiple inputs, including optical and digital coaxial connections, allowing users to connect various audio sources such as Blu-ray players, gaming consoles, and streaming devices. Additionally, the inclusion of composite and component video outputs ensures compatibility with older TVs and projectors, making it a versatile option for any home setup.

Further enhancing its appeal, the DPR 1001 integrates Dolby Digital and DTS processing technologies, enabling an authentic cinematic experience. With the ability to decode these formats, it transforms your living room into a theater-like atmosphere, perfect for movie nights or gaming marathons.

When it comes to build quality, Harman-Kardon maintains its reputation with a sleek and durable construction. The unit’s design not only looks good but also optimizes acoustics, ensuring crystal-clear sound reproduction.

Overall, the Harman-Kardon DPR 1001 stands out for its powerful performance, advanced audio technologies, and user-friendly features. Whether you are an audiophile or simply looking to enhance your home entertainment system, this receiver is a compelling choice that will elevate your audio experience.
Top Page Image Contents