Harman-Kardon DPR 1001 owner manual Front Panel Controls

Page 6

FRONT PANEL CONTROLS

This button is also used to switch between Stereo and Mono modes for FM radio reception. When weak reception is encountered, press the button to switch to the Mono mode. Press it again to switch back to Stereo mode. (See page 28 for more information on using the tuner.)

7Tuning Selector: Press the left side of the button to tune lower-frequency stations and the right side of the button to tune higher-frequency stations.

In Manual tuning mode, tap the button lightly and the tuner will step up one frequency increment per button press. When the button is held for a few seconds, the unit will quickly advance through the frequency band.

Release it and the tuner will stop. In Auto tuning mode, each press of the button will search for the next sta- tion with an acceptable signal. Press and hold the button to skip through the acceptable stations. When the button is released, the tuner will not stop until it reaches a station with an acceptable signal.

To switch back and forth between the Auto and Manual tuning modes, press the Tuning Mode Selector 6.

8Preset Station Selector: Press this button to scroll up or down through the list or stations that have been entered into the preset memory. (See page 28 for more information on tuner programming.)

9 ¤ Button: Use this button to scroll through the System Configuration modes indicated on the front panel: i.e., Test Tone, Speaker, Channel, Digital Select and Delay. Press the Set Button ! to select a con- figuration mode, and use this button or the ⁄ Button

Bto scroll through the available adjustments for each System Configuration mode. (See pages 17–23 for more information on configuring the DPR 1001.)

!Set Button: Press this button to access the config- uration menus for Test Tone, Speakers Channel Trim, Digital Input Select or Delay. After pressing the button, use the ⁄/¤ Buttons 9B to select the desired menu. (See pages 17–23 for more information.)

B ⁄ Button: Use this button to scroll through the System Configuration modes indicated on the front panel: i.e., Test Tone, Speaker, Channel, Digital Select and Delay. Press the Set Button ! to select a configuration mode, and use this button or the

¤Button 9 to scroll through the available adjustments for each System Configuration mode. (See pages 17–23 for more information on configuring the DPR 1001.)

CDoor: Gently pull the upper right corner of this door, indicated by the word “Open”, toward you to reveal additional front panel jacks and controls.

DVolume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the DPR 1001 is muted, adjusting the vol- ume control will automatically release the unit from the silenced condition.

ESystem Configuration Indicators: One of these indicators will light, after the Set Button ! has been pressed, to indicate which configuration option is in use. Press the ⁄/¤ Buttons 9B to change the selection. (See pages 17–23 for more information.)

FMain Information Display: This display delivers messages and status indications to help you operate the receiver. (See page 7 for a complete explanation of the Main Information Display.)

GInput Indicators: An LED will light to the left of the input that is currently the input source for the DPR 1001.

HSurround Mode Indicators: An LED will light in front of the surround mode that is currently in use.

IMain Power Switch: Press this button in to apply power to the DPR 1001. When the switch is pressed in, the unit is placed in a Standby mode, as

indicated by the red Power Indicator . This but- ton must be pressed in to operate the unit. To turn the unit off and prevent the use of the remote con- trol, this switch should be pressed until it pops out from the front panel.

NOTE: This switch is normally left in the “ON” position.

JHeadphone Jack: This jack may be used to listen to the DPR 1001’s output through a pair of head- phones. Be certain that the headphones have a stan- dard 1/4" stereo phone plug. The main room speakers will automatically be turned off when the headphone jack is in use.

KDigital Optical 3 Input: Connect the optical digital audio output of an audio or video product to this jack. When the input is not in use, be certain to keep the plastic cap installed to avoid dust contamination that might degrade future performance.

LInput/Output Status Indicators: These LED indicators will normally light green to show that the front panel Digital Coax 3 Jack M or Video 4 Input/ Output Jacks N are operating as inputs. When either of these jacks has been configured for use as an out- put, the indicator will turn red to show that the jack may be used for recording. (See page 18 or 29 for more information on configuring the front panel jacks as outputs, rather than inputs.)

MDigital Coax 3 Jack: This jack is normally used for connection to the output of portable audio devices, video game consoles or other products that have a coax digital audio jack. It may also be configured as an output jack, to feed a digital signal to a CD-R, MiniDisc or other digital recording device. (See page 18 or 29 for information on configuring the Digital Coax 3 Jack as an output.)

NVideo 4 Input/Output Jacks: These audio/video jacks may be used for temporary connection to video games or portable audio/video products such as cam- corders and portable audio players. These jacks may also be configured as an output to feed an analog audio/video signal to a VCR, camcorder, tape deck or other recording device. (See page 18 or 29 for infor- mation on configuring the Video 4 jacks as outputs.)

6 FRONT PANEL CONTROLS

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DPR Table of Contents DPR 1001 Digital Path ReceiverIntroduction Description and FeaturesHigh-bandwidth, HDTV-compatible compo- nent video switching Modèle pour les CanadienSafety Information Important Safety InformationUnpacking System Configuration Indicators Power Indicator will turn green when the unit is onSurround Mode Selector Front Panel ControlsFront Panel Controls Lower Display Line OSD Indicator Upper Display Line Front Panel Information DisplayFront Right Red Rear Panel ConnectionsFront Left White Center Green33 6-Channel Direct Inputs When an optional 34 8-Channel Direct Inputs When an optionalSPL Select Button EzSet Microphone Sensor Lens Main Remote Control FunctionsProgram Button DPRDSP Surround Mode Selector Press this Tuning Mode Press this button when the tunerSeven-channel Stereo, depending on the speaker configuration See page 29 for more informationZone II Remote Control Functions Installation and Connections System InstallationSystem and Power Connections Speaker Selection and Placement System ConfigurationSpeaker Placement System SetupUsing the On-Screen Display Making Configuration AdjustmentsSetting the System Configuration Memory Input Setup Or 6.1-channel sound field To move the highlighted video to Surr When all crossover settings have been made, or T S P K R L E V E L S S E T Manual Output Level Adjustment Additional Input AdjustmentsBasic Operation Remote Control OperationOperation Source SelectionDigital Audio Playback Volume ControlSurround Mode Selection Dolby DigitalSurround Mode Chart Selecting a Digital Source Digital Status IndicatorsNight Mode From pTuner Operation RecordingFront Panel Connections Output Level Trim AdjustmentMemory Backup Channel/8-Channel Direct InputSurround Back Amplifier Assignment Advanced FeaturesTurn-On Volume Level Display BrightnessMultiroom Setup Multiroom OperationPreprogrammed Code Entry Configuring the RemoteMultiroom Operation Remote’s Main Menu messageAutomatic Code Entry Learning Commands Reassigning the commands used for a particular device Changing DevicesMacro Programming Macro. The choices are the Power On Button Sent when the Power button is pressedPower On VID 2/TV VID 3/Cable AVR Logic 7 Programmed e.g., the Power On Button 1 orPunch-Through Configuration Returning the Volume Control Settings to Default OperationRead a Macro Returning the Channel Control Settings to Default Operation EzSet Configuration RenamingWill remain illuminated in red. Press Button Bottom line of the display, as shown in FigureNumeric Keys Next characterResetting the Remote Additional Notes on Configuring and Operating the RemoteAt this point you have two options Desired output signal Troubleshooting GuideProcessor Reset From DTS or Dolby Digital DVDsDPR 1001 Technical Specifications
Related manuals
Manual 4 pages 27.76 Kb

DPR 1001 specifications

The Harman-Kardon DPR 1001 is an impressive addition to the realm of home audio equipment, primarily recognized for its advanced features and high-quality sound reproduction. This product blends the best of both stereo and multichannel audio, allowing users to enjoy a versatile listening experience.

One of the most notable features of the DPR 1001 is its ability to deliver true surround sound. With a 6-channel amplifier rated at 50 watts per channel, the unit offers enough power to fill a medium-sized room with rich, clear audio. Its unique Digital Power Processing technology allows for efficient power management while maintaining high audio fidelity. This technology ensures that the amplifier operates with minimal distortion, even at higher volume levels.

The AVR also boasts a smart user interface, designed to enhance usability. Its intuitive layout makes navigation straightforward, even for those less familiar with home theater systems. The remote control offers seamless access to various sound modes and settings; users can easily switch between movie and music modes, catering to different listening preferences.

Connectivity is another strong suit of the DPR 1001. It supports multiple inputs, including optical and digital coaxial connections, allowing users to connect various audio sources such as Blu-ray players, gaming consoles, and streaming devices. Additionally, the inclusion of composite and component video outputs ensures compatibility with older TVs and projectors, making it a versatile option for any home setup.

Further enhancing its appeal, the DPR 1001 integrates Dolby Digital and DTS processing technologies, enabling an authentic cinematic experience. With the ability to decode these formats, it transforms your living room into a theater-like atmosphere, perfect for movie nights or gaming marathons.

When it comes to build quality, Harman-Kardon maintains its reputation with a sleek and durable construction. The unit’s design not only looks good but also optimizes acoustics, ensuring crystal-clear sound reproduction.

Overall, the Harman-Kardon DPR 1001 stands out for its powerful performance, advanced audio technologies, and user-friendly features. Whether you are an audiophile or simply looking to enhance your home entertainment system, this receiver is a compelling choice that will elevate your audio experience.
Top Page Image Contents