Cisco Systems BC-23 manual Concurrent Routing and Bridging Example, BC-64

Page 42

Configuring Transparent Bridging

Transparent and SRT Bridging Configuration Examples

The configuration file for the router in Figure 12 is as follows:

interface tokenring 0

ip address 131.108.1.1 255.255.255.0 bridge-group 1

!

interface fddi 0

ip address 131.108.2.1 255.255.255.0 bridge-group 1

!

interface ethernet 0

ip address 192.31.7.26 255.255.255.240 bridge-group 1

!

interface serial 0

ip address 192.31.7.34 255.255.255.240 bridge-group 1

!

interface ethernet 1

ip address 192.31.7.65 255.255.255.240 bridge-group 1

!

bridge 1 protocol dec

Concurrent Routing and Bridging Example

In the following example DECnet and IPX are concurrently routed and bridged. IP and AppleTalk are routed on all interfaces, DECnet and IP are routed on all interfaces not in the bridge group, and all protocols other than IP and AppleTalk are bridged on all interfaces in the bridge group:

!

ipx routing 0000.0c36.7a43 appletalk routing

!

decnet routing 9.65

decnet node-type routing-iv

!

interface Ethernet0/0

ip address 172.19.160.65 255.255.255.0 ipx network 160

appletalk address 160.65 decnet cost 7

!

interface Ethernet0/1

ip address 172.19.161.65 255.255.255.0 ipx network 161

appletalk address 161.65 decnet cost 7

!

interface Ethernet0/2

ip address 172.19.162.65 255.255.255.0 appletalk address 162.65 bridge-group 1

!

interface Ethernet0/3

ip address 172.19.14.65 255.255.255.0 appletalk address 14.65

appletalk zone california bridge-group 1

!

router igrp 666 network 172.19.0.0

Cisco IOS Bridging and IBM Networking Configuration Guide

BC-64

Image 42
Contents Transparent and SRT Bridging BC-23Transparent Bridging Features Integrated Routing and BridgingBC-24 Bridge-Group Virtual Interface BC-25BC-26 Bridge-Group Virtual Interface in the RouterSRT Bridging Features Other ConsiderationsBC-27 Transparent and SRT Bridging Configuration Task List BC-28As Ieee 802.1D standard, DEC or Vlan bridge Configuring Transparent Bridging and SRT BridgingAssigning Each Network Interface to a Bridge Group BC-29Choosing the OUI for Ethernet Type II Frames Command PurposeTransparently Bridged VLANs for ISL BC-30BC-31 Transparently Bridged VLANs on an Fddi BackboneRouting between ISL VLANs BC-32Same bridge group Specifies a subinterfaceSubinterface with the Vlan BC-33Configuring Fast-Switched Transparent Bridging over ATM Configuring a Subscriber Bridge GroupConfiguring Transparent Bridging over WANs BC-34Defining the Protocols to Bridge Configuring Transparent Bridging over DDRCommand Specifying the Bridging ProtocolConfiguring an Interface for Bridging Configuring Transparent Bridging over Frame RelayDetermining Access for Bridging Fast-Switched Transparent BridgingBridging in a Frame Relay Network with Multicasts Configuring Transparent Bridging over Multiprotocol LapbBridging in a Frame Relay Network with No Multicasts BC-37Specifies IP-to-X.121 mapping Configuring Transparent Bridging over SmdsConfiguring Transparent Bridging over BC-38Specifies a protocol to be routed on a bridge group Configuring Concurrent Routing and BridgingConfiguring Integrated Routing and Bridging BC-39Enabling Integrated Routing and Bridging Configuring InterfacesConfiguring the Bridge-Group Virtual Interface BC-40Configuring Protocols for Routing or Bridging BC-41Configuring Transparent Bridging Options Disabling IP RoutingBC-42 Configuring LAT Compression Enabling Autonomous BridgingBC-43 Establishing Multiple Spanning-Tree Domains Establishes a multiple spanning-tree domainBC-44 Forwarding Multicast Addresses Configuring Bridge Table Aging TimeFiltering Transparently Bridged Packets BC-45Setting Filters at the MAC Layer BC-46Ethernet-ordered MAC address Filters particular MAC-layer station addressesFiltering by Vendor Code BC-47Filtering by Protocol Type TypeBC-48 Interface Defining and Applying Extended Access ListsConfiguration mode BC-49BC-50 Filtering LAT Service Announcements Enabling LAT Group Code Service FilteringBC-51 Adjusting Spanning-Tree Parameters BC-52Adjusting Bpdu Intervals Setting the Bridge PrioritySetting an Interface Priority Assigning Path CostsDisabling the Spanning Tree on an Interface Adjusting the Interval between Hello BPDUsDefining the Forward Delay Interval Defining the Maximum Idle IntervalBC-55 Configuring the PA-12E/2FE Port Adapter BC-56Monitoring and Maintaining the PA-12E/2FE Port Adapter BC-57BC-58 BC-59 Configuring Circuit Groups BC-60Distributes base load on the source MAC address only Configuring Constrained Multicast FloodingConfigures a transmission pause interval BC-61BC-62 Basic Bridging Example BC-63Concurrent Routing and Bridging Example BC-64Basic Integrated Routing and Bridging Example BC-65Complex Integrated Routing and Bridging Example BC-66Transparently Bridged VLANs Configuration Example BC-67Router One Router TwoBC-68 Router Three BC-69Routing between VLANs Configuration Example Ethernet-to-FDDI Transparent Bridging ExampleBC-70 Ethernet Bridging Example Router/Bridge in BuildingBC-71 SRT Bridging Example BC-72Multicast or Broadcast Packets Bridging Example Configuration for the New York City RouterConfiguration for the Thule, Greenland Router BC-73Configuration for Bridge Transparent Bridging ExampleBC-74 Frame Relay Transparent Bridging Examples Bridging in a Frame Relay Network with No MulticastsBC-75 Transparent Bridging over Multiprotocol Lapb Example Bridging in a Frame Relay Network with MulticastsBC-76 Transparent Bridging over DDR Examples BC-77Fast-Switched Transparent Bridging over Smds Example Complex Transparent Bridging Network Topology ExampleBC-78 BC-79 Bridged Subnetworks with DomainsConfiguration for Router a BC-80Configuration for Router D Configuration for Router BConfiguration for Router C BC-81Fast Ethernet Subscriber Port, Frame Relay Trunk Example ATM Subscriber Ports, ATM Trunk ExampleBC-82 BC-83 Configuration of IRB for PA-12E/2FE Port Adapter Example BC-84

BC-23 specifications

Cisco Systems has long been a leader in the networking industry, and its BC-23 model exemplifies the company's commitment to innovation and performance. Aimed at enhancing business operations, the BC-23 is tailored for organizations looking for robust solutions that support their digital transformation efforts.

One of the standout features of the Cisco BC-23 is its advanced networking capabilities. It supports high-speed data transmission, enabling seamless communication across networks. With multi-gigabit Ethernet ports, the BC-23 facilitates faster data rates, accommodating the increasing bandwidth demands of modern applications. This feature is particularly beneficial for businesses that rely heavily on cloud services, video conferencing, and data-heavy applications.

Security is a top priority, and the Cisco BC-23 incorporates cutting-edge security measures. Integrated threat detection and prevention systems help safeguard sensitive data from cyber threats. Additionally, the device supports secure access protocols, ensuring that only authorized users can connect to the network. This multi-layered security approach not only protects the network infrastructure but also secures the integrity of the data being transmitted.

Another significant characteristic of the BC-23 is its support for software-defined networking (SDN). This technology allows businesses to manage their networks through centralized software applications, facilitating real-time adjustments and optimizations. The flexibility afforded by SDN is especially advantageous in dynamic environments where network demands can shift rapidly.

The Cisco BC-23 also offers enhanced management features, allowing IT teams to monitor network performance and analytics effectively. This visibility into network operations enables organizations to identify potential issues before they escalate, minimizing downtime and keeping business processes smooth.

Furthermore, the BC-23 is designed for scalability. As organizations grow, their networking needs evolve, and the BC-23 can easily adapt to these changes. Businesses can add additional devices and capabilities without the need for a complete overhaul of their existing infrastructure.

With its combination of speed, security, and scalability, the Cisco Systems BC-23 is an invaluable asset for modern businesses. It stands out not just as a networking device but as a comprehensive solution that meets the demands of today's fast-paced, technology-driven environment. As companies continue to leverage digital tools for growth and efficiency, the BC-23 will undoubtedly play a significant role in their success.