Gemini CDM-3200 manual Mixer Section, Fader Replacement, Troubleshooting

Page 6

MIXER SECTION:

23CHANNEL INPUT SELECTOR: The CHANNEL INPUT SE- LECTOR switches allow you to choose which input will be controlled by that channels corresponding volume FADER. For example CHANNEL (1) INPUT SELECTOR allows you to choose between line (1) (That sides internal CD player), line

(2)which is line input RCA (1). The same applies for channel

2.

24CHANNEL ROTARY GAIN: The CHANNEL ROTARY GAIN allows you to boost the signal of each individual channel de- pending on how low or high its input level is.

252-BAND EQUALIZER: The 2-BAND EQUALIZER adjusts the tone of each CHANNEL by giving you a choice 2 frequencies (BANDS) to adjust, from LOW and HIGH’s, you can use the adjustment knobs to raise or lower the 2 separate frequen- cies until the sound of the music program is appropriate for your listening environment.

26CHANNEL VOLUME FADER: After you have chosen which input you will use with the INPUT SELECTOR the corre- sponding CHANNEL FADER will allow you to adjust the vol- ume for that particular CHANNEL.

27CHANNEL CUE SELECTOR: The CHANNEL CUE SELEC- TOR allows you to choose which channel you wish to monitor in your headphones, to the left is CHANNEL (1) to the right is CHANNEL (2) and the middle position is BOTH (1 & 2).

28CUE VOLUME ROTARY KNOB: The CUE VOLUME ROTA- RY KNOB adjusts your HEADPHONE MONITOR OUTPUT’S volume.

29MICROPHONE VOLUME ROTARY KNOB: Allows you to ad- just the volume of the microphone signal.

30MASTER VOLUME ROTARY KNOB: The MASTER VOUME rotary knob adjusts the volume of the MAIN MASTER out- put.

31VU METER: The CDM-3200 has a stereo VU METER that allows you to monitor the decibel levels of the LEFT and RIGHT MASTER output.

32FADER START BUTTON: The Fader Start function allows you to start CD playback simply by moving the CROSSFAD- ER from side to side.

A.Cue up the CD player you wish to start using the Fader Start function

B.Move the CROSSFADER all the way to the opposite side of the CD you have just cued.

C.Press the FADER START SELECTOR button so that the button becomes illuminated.

D.At the point in which you wish to start the audio from the Cued CD, simply move the CROSSFADER in the di- rection of the Cued CD player, and playback will begin.

E.When the CROSSFADER is moved all the way to the

CDM-3200

opposite side of the currently playing disc, the unit will stop playing that disc and return to the beginning of the track or the set cue point.

33 CROSS FADER: The CROSS FADER allows you to mix evenly from one source to another. The CROSS FADER on the CDM-3200 is also removable and if the need arises can be replaced. The RG-45 (RAILGLIDE™) DUAL-RAIL CROSS FADER, which has internal dual stainless steel rails that allow the slider to ride smoothly and accurately from end to end can be purchased from your local GEMINI dealer.

NOTE: WHEN USING THE CROSS FADER LIGHTLY GLIDE THE FADER BACK AND FORTH. PRESSING DOWN ON THE CONTROLS CAN BEND CONTACTS AND CAUSE A LOSS OF SOUND.

FADER REPLACEMENT:

1.UNSCREW THE FADER SCREWS. DO NOT TOUCH IN- SIDE SCREWS CAREFULLY REMOVE OLD CROSS FADER AND UNPLUG CABLE.

2.PLUG IN THE NEW CROSS FADER INTO CABLE AND PLACE BACK INTO MIXER.

3.SCREW THE CROSS FADER TO MIXER WITH THE FAD- ER PLATE SCREWS

4.REPLACE THE FACE OF THE MIXER AND SCREW THE FOUR SCREWS BACK IN AND REPLACE THE FADER KNOBS.

TROUBLESHOOTING:

- If a disc will not play, check to see if the disc was loaded cor- rectly (label side up). Also check the disc for excessive dirt, scratches, etc.

- If the disc turns but there is no sound, check the cable con- nections, if they are ok, check your amplifier or receiver.

- If the CD skips, check the CD for dirt or scratches. Do not as- sume that the CD layer is defective. Many CD’s are recorded out of spec and will skip on most or all CD players. Before sending the unit for repair, try playing a CD that you are sure plays properly.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Utilisateurs Francais FUR Deutsche Leser Página 8 PáginaGrounding or Polarization CDM-3200 TOPPrecautions FeaturesSafety Specifications IntroductionCDM-3200 Fader Replacement TroubleshootingMixer Section Audio Section SpecificationsGeneral InputsPOR Favor LEA Importantes DE SeguridadEspecificaciones DE Seguridad IntroduccionCaracteristicas PrecaucionesPara re-enganchar el loop debe pulsar el botón RE- Loop Resolucion DE Problemas Seccion DE MixerReemplazo DEL Crossfader Entradas EspecificacionesSección Audio SalidasChoc Mises EN Garde Specifications LaserCaracteristiques ConnexionsMODE PITCH BEND Temps Ecoule TEMPS RESTANT Temps Total RestantDysfonctionnements Remplacement DU CrossfaderSection Console DE Mixage PhoneGenerales Achtung Sicherheits Informationen EinleitungEigenschaften VorsichtsmassnahmenCDM-3200 Mixer Sektion Fader AustauschenFehlerbeseitigung Audio Abschnitt Technische DatenAllgemein EingängeWarrant Y and Repair GCI Technologies Corp All Rights Reserved

CDM-3200 specifications

The Gemini CDM-3200 is a versatile and robust dual-deck CD player designed for professional DJs and music enthusiasts alike. This device stands out for its comprehensive features and user-friendly interface, making it a popular choice in clubs, radio stations, and event venues.

One of the main features of the Gemini CDM-3200 is its dual-deck configuration, which allows DJs to seamlessly mix two audio sources simultaneously. Each deck is equipped with an illuminated display that provides real-time information on track number, time remaining, and other crucial data, ensuring that users can quickly navigate their playlists. The CD player supports various formats, including standard audio CDs, CD-Rs, and CD-RWs, making it adaptable to a wide range of music libraries.

In terms of technology, the CDM-3200 integrates advanced pitch control and variable speed functions, enabling DJs to adjust the tempo of tracks with ease. This feature is essential for beatmatching and maintaining a seamless flow during live performances. Additionally, the player includes a built-in anti-shock mechanism that reduces the risk of audio dropouts, ensuring uninterrupted playback even in high-energy environments.

Another significant characteristic of the Gemini CDM-3200 is its user-friendly interface. The device features large, responsive jog wheels and an intuitive layout that allows for quick access to essential functions such as looping, cue points, and pitch bending. Furthermore, the inclusion of USB connectivity means that users can also play audio files directly from USB drives, broadening the range of playback options available.

The CDM-3200 also comes equipped with built-in effects such as echo, flanger, and filter, giving DJs the tools they need to add creativity and depth to their mixes. The device is designed for durability and reliability, with a sturdy casing suitable for both mobile and stationary setups.

In conclusion, the Gemini CDM-3200 is a powerful dual-deck CD player that combines flexibility, advanced technology, and user-friendly design. With its rich set of features, including dual playback, pitch control, USB compatibility, and built-in effects, it represents an excellent investment for any DJ looking to elevate their performance and enhance their music mixing capabilities. Its durable construction ensures that it can withstand the rigors of frequent use in various environments, making it a trusted choice in the world of DJ equipment.
Top Page Image Contents