Hans Grohe 2810BXX1, 28110XX1 Using the Allrounder, Guide the hose over the hose hook

Page 11

Guide the hose over the hose hook.

Slide the handshower into the holder, until the holder grips it firmly.

Guide the hose over the hose hook.

Using the Allrounder

To adjust the handshower height:

Pull or push the Allrounder to the desired position.

Turn the knob to the front to make the Allrounder easier to move.

Turn the knob to the rear to make it harder to move.

11

Image 11

Contents Installation Instructions / Warranty Raindance AllrounderWall Outlet Adapter with Hose Connection Determining the mounting height Technical DataRaindance Allrounder 28110XX1If you are not using the 28108XX1 wall outlet adapter, go to page Roughing inDo not overtighten, or damage will result InstallationFailure to seal the wall can lead to possible water damage Seal the wall around the anchors with waterproof sealantInstall the handshower Check Valve Maintenance Backflow preven Replacement PartsCorner Mount Kit Do not drill through the mounting plate Install the 28110XX1 AllrounderFailure to seal the wall can lead to possible water damage Pull or push the Allrounder to the desired position Using the AllrounderTo adjust the handshower height Guide the hose over the hose hookChange the spray modes Raindance E 150 Air 3-Jet HandshowerLimescale Removal Replacement parts Cleaning Instructions for Faucets and Showers Cleaning Recommendation for Hansgrohe ProductsLimited Lifetime Consumer Warranty Cleaning Materials for Faucets and ShowersTHIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR Tel. 770-360-9880 Fax US - Installation Instructions Part No. 90661501 Revised 01/2008Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GA