Hans Grohe 2810BXX1, 28110XX1 installation instructions Roughing in

Page 3

If you are not using the 28108XX1 wall outlet adapter, go to page 9.

Install the Allrounder with the Optional Wall Outlet Adapter with Hose Connection 28108XX1

If you are not using the 28108XX1 wall outlet adapter, go to page 9.

Roughing in

Install a properly anchored 1/2" NPT drop-eared ell, at least 2" behind the surface of the finished wall. Install a test nipple in the ell.

When the finished wall is complete, mark the test nipple at the wall surface. Remove the test nipple.

Measure the test nipple to the mark.

Subtract 3/8" from this measurement. This is the length of the brass nipple required to install the wall outlet adapter.

Image 3

Contents Raindance Allrounder Wall Outlet Adapter with Hose ConnectionInstallation Instructions / Warranty Determining the mounting height Technical DataRaindance Allrounder 28110XX1If you are not using the 28108XX1 wall outlet adapter, go to page Roughing inDo not overtighten, or damage will result InstallationFailure to seal the wall can lead to possible water damage Seal the wall around the anchors with waterproof sealantInstall the handshower Check Valve Maintenance Backflow preven Replacement PartsCorner Mount Kit Do not drill through the mounting plate Install the 28110XX1 AllrounderInstall the handshower Pull or push the Allrounder to the desired position Using the AllrounderTo adjust the handshower height Guide the hose over the hose hookRaindance E 150 Air 3-Jet Handshower Limescale RemovalChange the spray modes Replacement parts Cleaning Instructions for Faucets and Showers Cleaning Recommendation for Hansgrohe ProductsLimited Lifetime Consumer Warranty Cleaning Materials for Faucets and ShowersTHIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR US - Installation Instructions Part No. 90661501 Revised 01/2008 Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GATel. 770-360-9880 Fax