Hans Grohe 2810BXX1, 28110XX1 Seal the wall around the anchors with waterproof sealant

Page 5

Seal the wall around the anchors with waterproof sealant.

Drill the holes with a 6 mm bit. Use extreme caution - do not drill into the water line.

Install the anchors.

Seal the wall around the anchors with waterproof sealant.

Failure to seal the wall can lead to possible water damage.

Install the mounting plate, using the screws and offset bushings provided.

Remove the long bottom mounting screw on the All- rounder. Replace with the shorter screw included with the adapter.

Image 5

Contents Installation Instructions / Warranty Raindance AllrounderWall Outlet Adapter with Hose Connection Raindance Allrounder Technical Data28110XX1 Determining the mounting heightIf you are not using the 28108XX1 wall outlet adapter, go to page Roughing inDo not overtighten, or damage will result InstallationFailure to seal the wall can lead to possible water damage Seal the wall around the anchors with waterproof sealantInstall the handshower Check Valve Maintenance Backflow preven Replacement PartsCorner Mount Kit Do not drill through the mounting plate Install the 28110XX1 AllrounderFailure to seal the wall can lead to possible water damage To adjust the handshower height Using the AllrounderGuide the hose over the hose hook Pull or push the Allrounder to the desired positionChange the spray modes Raindance E 150 Air 3-Jet HandshowerLimescale Removal Replacement parts Limited Lifetime Consumer Warranty Cleaning Recommendation for Hansgrohe ProductsCleaning Materials for Faucets and Showers Cleaning Instructions for Faucets and ShowersTHIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR Tel. 770-360-9880 Fax US - Installation Instructions Part No. 90661501 Revised 01/2008Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GA