Hans Grohe 2810BXX1 Install the 28110XX1 Allrounder, Do not drill through the mounting plate

Page 9

Install the 28110XX1 Allrounder

Install the 28110XX1 Allrounder

Do not drill through the mounting plate.

Place the mounting plate against the wall at the de- sired location. Mark the locations of the screw holes.

Put the mounting plate away in a safe location. Drill the holes, using a 6 mm bit.

Image 9

Contents Raindance Allrounder Wall Outlet Adapter with Hose ConnectionInstallation Instructions / Warranty Raindance Allrounder Technical Data28110XX1 Determining the mounting heightIf you are not using the 28108XX1 wall outlet adapter, go to page Roughing inDo not overtighten, or damage will result InstallationFailure to seal the wall can lead to possible water damage Seal the wall around the anchors with waterproof sealantInstall the handshower Check Valve Maintenance Backflow preven Replacement PartsCorner Mount Kit Do not drill through the mounting plate Install the 28110XX1 AllrounderInstall the handshower To adjust the handshower height Using the AllrounderGuide the hose over the hose hook Pull or push the Allrounder to the desired positionRaindance E 150 Air 3-Jet Handshower Limescale RemovalChange the spray modes Replacement parts Limited Lifetime Consumer Warranty Cleaning Recommendation for Hansgrohe ProductsCleaning Materials for Faucets and Showers Cleaning Instructions for Faucets and ShowersTHIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR US - Installation Instructions Part No. 90661501 Revised 01/2008 Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GATel. 770-360-9880 Fax