Operations Common to Each Mode
English
Setting the clock
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CLOCK ”.
3.Press the [ ] button.
4.Press the [a] or [d] button to select the hour or the minute.
5.Turn the [ROTARY] knob clockwise or coun- terclockwise to set the correct time.
∗ The clock is displayed in
COLOR | R | G |
RED | 8 | 0 |
MANDARIN | 8 | 1 |
ORANGE | 8 | 2 |
AMBER | 8 | 5 |
YELLOW | 8 | 8 |
6 | 8 | |
LIME | 4 | 8 |
GREEN | 2 | 8 |
0 | 8 |
6.Press the [ ] button to store the time into memory.
7.Press the [T] button to return to the previous mode.
Note:
•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or opera- tion is selected, the clock set mode is canceled.
Setting the button illumination
Press the [COLOR] button to select a color type. Each time you press the [COLOR] button, the type changes in the following order:
COLOR SCAN ➜ RED ➜ MANDARIN ➜ ORANGE ➜ AMBER ➜ YELLOW ➜
➜USER ➜ COLOR SCAN…
●Setting COLOR SCAN mode
As selecting “COLOR SCAN”, the color auto- matically changes.
∗The factory default setting is “COLOR SCAN”.
∗After 3 second the color changes to the other.
● Setting USER mode
The factory default setting is “R>8 G>8” (R: red,
G: green).
As selecting “USER”, press and hold the
[COLOR] button for 1 second or longer “R>8 G>8” appears in the display.
1.Press the [a] or [d] button to move the cursor.
2.Turn the [ROTARY] knob clockwise or coun- terclockwise to select from 0 to 8.
3.Press and hold the [ ] button for 2 sec- onds or longer to store the color in memory and cancel setting mode.
Entering titles
Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be en- tered for each mode are as follows.
Mode | Number of titles |
CD mode | 50 titles |
TV mode | 20 titles |
Tuner mode | 30 titles |
CD changer mode | Number of titles |
DCZ625 connected | 100 titles |
CDC655Tz connected | 100 titles |
CDC1255z connected | 50 titles |
1.Press the [FNC] button to select the mode you want to enter a title (TUNER, CD, CD changer or TV).
2.Select and play a CD in the CD changer or tune in to a TV station or TUNER for which you want to enter the title.
3.Press the [D] button and display the main.
4.Press the [T] button.
5.Press the [a] or [d] button to move the cursor.
6.Press the [D] button to select a character. Each time you press the [D] button, the char- acter changes in the following order:
Capital letters ➜ Small letters ➜ Numbers and Symbols ➜ Umlaut ➜ Capital letters…
7.Turn the [ROTARY] knob to select the de- sired character.
8.Repeat steps 5 to 7 to enter up to 10 charac- ters for the title.
9.Press and hold the [ ] button for 2 sec- onds or longer to store the title into memory and cancel title input mode.
24 DXZ645MP