Clarion DXZ645MP owner manual Radio Operations

English	Basic Operations
	∗ The factory default setting is “TÅFREQ 12KΔ.
	(Adjustment 8 kHz/12 kHz)
	4. When the adjustment is complete, press the
	[A-M] button several times until the function
	mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BAL 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “BAL 0”. (Adjust- ment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “FADER 0”. (Ad- justment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound ad- justment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗ The factory default setting is off.

1.Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EX- TEND effect. “M-B EX” lights in the display.

2.Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EX- TEND effect. “M-B EX” goes off from the dis- play.

Radio Operations

FM reception

For enhanced FM performance the ® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.

Listening to the radio

1.Press the [FNC] button and select the radio mode. The frequency appears in the display.

2.Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3.Press the [a] or [d] button to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the [BND] button and select the de- sired band (FM or AM).

∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available.

2.Press the [a] or [d] button to automatically seek a station.

When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies.

Manual tuning

There are 2 ways available: Quick tuning and step tuning.

When you are in the step tuning mode, the fre- quency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.

1.Press the [BND] button and select the de- sired band (FM or AM).

∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.

2.Tune into a station.

14 DXZ645MP