• | Briefly press the Start/Stop button | to interrupt | |
| the programme at the very start of the baking | ||
| phase or, remove the power plug from the wall | ||
| socket. Ensure that you | ||
| within 10 minutes so that the baking process can | ||
| be continued. |
|
|
• | Open the appliance lid | and remove the | |
| baking mould . You can take the dough out | ||
| with floured hands and remove the kneading | ||
| paddles . |
|
|
•Lay the dough back into the baking mould .
Replace the baking mould | and close the |
appliance lid . |
|
•Insert the power plug into the wall socket. The baking programme continues from where it was stopped.
Allow the bread to cool for
Before cutting the bread, ensure that the kneading paddles have been removed .
Error Messages
• If the display shows "HHH" after the program- me has been started, it indicates that the tempe- rature in the Bread Baking Machine is still too high. Stop the programme and remove the power plug. Open the appliance lid and allow the ma- chine to cool down for 20 minutes before re- using it.
•If a new Programme cannot be started directly after the Bread Baking Machine has completed
a baking process, it means the appliance is still too hot. In this case the display panel reverts to the default setting (Programmme 1). Open the
appliance lid and allow the machine to cool down for 20 minutes before
Warning
Do not attempt to take the appliance into use befo- re it has cooled itself down. This functions only with programmes 11 and 12.
•If the display shows "EE0", "EE1" or "LLL" after the programme has been started, first of all switch the Bread Baking Machine off and then back on by removing and then
Cleaning and Care
Warning
Before cleaning it, always remove the power plug from the wall socket and allow the appliance to cool down completely.
Protect the appliance against moisture, this could cause you to receive an electric shock.
Please also observe the safety instructions.
Important
The appliance and its ancillaries are not suitable for being cleaned in a dish washing machine!
Housing, lid, baking space
Remove all particles left behind inside the baking area using a wet cloth or a slightly wet soft spon- ge. Wipe the housing and the lid too, only with a moist cloth or sponge.
•Ensure that the interior is completely dry. For
| easier cleaning, the appliance lid | can be | |
| removed from the housing: |
| |
• | Open the appliance lid | until the wedge- | |
| shaped hinge cams pass through the ope- | ||
| nings of the hinge guides. |
| |
• | Pull the appliance lid | out of the hinge guides. | |
- 10 -