Dell TL2000 manual Error Code Description User Action

Table 8-1. Error Codes (continued)

Error Code	Description	User Action
8E	Cannot find gripper block within the
	expected range
8F	Cannot find slider block within the
	expected range
90	Cannot find elevator block within the
	expected range
91	Cannot find rotation block within the
	expected range
92	Cannot find sled block within the
	expected range
93	Gripper outside range,
	Gripper has reached a position beyond
	the expected range
94	Slider outside range,
	Slider has reached a position beyond the
	expected range
95	Elevator outside range,
	Elevator has reached a position beyond	1. Run the Library Verify Test, then retry the operation.
		2. If the error recurs, contact technical support.
	the expected range
96	Rotation outside range,
	Rotation has reached a position beyond
	the expected range
97	Sled outside range,
	Sled has reached a position beyond the
	expected range
98	Cartridge present sensor not found
99	Slider home sensor not found
9A	Rotation home sensor not found
9B	Sled position sensor not found
9C	Gripper range out of specification
9D	Slider range out of specification
9E	Elevator range out of specification
9F	Rotation range out of specification
A0	Sled range out of specification
A1	Open I/O Station (Import/Export
	Element) failed
B0	Robotic controller response timeout. A
	command did not complete in the	Contact technical support.
	required amount of time.
B1	NACK (not acknowledged) received
	from robotic controller
B2	Accessor controller communication failed

Chapter 8. Error Codes 8-5