Dell TL2000 Configure Library Encryption, Setting or Changing a Drive’s Method of Encryption

a77ug117

Figure 5-33. The 4U library Configure Library: Path Failover page

After clicking Activate, this page will display if you have entered the feature key correctly.

a77ug118

Figure 5-34. Path Failover license verification page

Note: Follow the instructions in the Dell PowerVault TL4000 Failover Configuration Guide to configure your environment for failover.

Configure Library: Encryption

Note: Application Managed Encryption (AME) does not require a key. Library Managed Encryption requires a license key. The customer should contact their TSR (technical sales representative) to purchase this feature.

Prerequisites for Application Managed Encryption:

vSAS and Fibre Channel LTO Ultrium 4 Tape Drive (Full Height or Half Height) Note: Fibre Channel is full height drive only.

vUltrium 4 Tape Cartridge

vLibrary firmware level 5.80 or higher

vDrive firmware level 77BE or higher

vTape backup software application that supports LTO4 encryption

Prerequisites for Library Managed Encryption:

vSAS and Fibre Channel LTO Ultrium 4 Tape Drive (Full Height or Half Height) Note: Fibre Channel is full height drive only.

vUltrium 4 Tape Cartridge

vLibrary firmware level 5.80 or higher

vDrive firmware level 77BE or higher

vDell Encryption Key Manager application

Setting or Changing a Drive’s Method of Encryption

1.Enter your library’s IP Address in an internet browser address field and press

ENTER.

2.Log in to the Web User Interface. Refer to “Login” on page 2-5.

3.Expand Configure Library in the left navigation pane.

4.Click Encryption.

Chapter 5. Operations 5-41