Dell TL2000 manual Unpacking the Library, Verifying the Shipment

Table 4-1. Location criteria (continued)

Criteria	Definition
Clearance	v Back: Minimum of 15.4 cm (6 inches)
	v Front: Minimum of 30.8 cm (12 inches)
	v Sides: Minimum of 5.08 cm (2 inches)
Rack requirements	Standard 19-inch rack with:
	v 2U	(63.5 mm/3.5 in.) of clearance for a 2U library
	v 4U	(177.8 mm/7 in.) of clearance for a 4U library
	Rackmounting the library is optional.

Unpacking the Library

Note: If the temperature in the room where the library will be installed varies by 15° C (30° F) from the room where the library was stored, allow the library to acclimate to the surrounding environment for at least 12 hours before unpacking it from the shipping container.

1.Before you begin, clear a work surface to unpack the library.

2.Open the shipping container and carefully remove the shipping materials from the top of the library. Remove the accessory package and set it aside.

Important: Once the drive is unpacked, save and store the packaging materials for future moves or shipping.

3.Lift the library out of the carton and remove the bag from the library. Remove the foam cushion from the back of the library. Save the packaging materials for future use.

Important: Do not place the library on the front panel or the rear panel as this may damage the library. The display should NOT be touched during the removal of the unit from the packaging.

4.Remove all clear plastic protective sheets from the library.

a77ug194

Figure 4-1. Removing the plastic protective sheets from the library

Verifying the Shipment

Verify that the following items are included in your library shipment:

vWith every library:

–Power cord

–Cleaning cartridge

4-2Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide