Element
In the Source screen, this identifies the library element that contains a
cartridge. In the Destination screen, this identifies the library element that
is empty and can receive a cartridge.
Volume Serial
In the Source screen, this element displays the serial number of the
cartridge. In the Destination screen, this element contains no information.
Manage Library: Perform Inventory
This page provides the user to re-scan the library to determine the current media
inventory.
Manage Library: Release Magazine
This page allows the user to release the right or left magazine from the library.
Note: To manually release a magazine, see “Releasing the Magazines Manually”
on page 9-1. However, this manual process should only be used if the
magazine cannot be released using the Operator Control Panel or the Web
User Interface.
Service Library Menu
The 2U/4U library is always online, except for when the user enters the Service
Library area. A warning message appears stating that the library should be taken
offline from the host before performing any Service functions. It is up to the
operator to ensure that it is taken offline by phoning the host operator or other
means of communication. Before performing any service functions, ensure the host
is not performing any data writing or retrieval.
Service Library: Clean Drive
This page allows the user to clean the tape drive. After the requested drive is
cleaned, the screen will be greyed out. If you want to clean another drive, click on
the Navigation bar ″Service Library: Clean Drive″ in the left column of your screen
to activate the ″Clean Drive″ screen and select another drive. Click on ″Clean″.
a77ug076
Figure 5-46. Manage Library: Perform Inventory page
a77ug078
Figure 5-47. Manage Library: Release Magazine page
5-50 Dell PowerVault TL2000 Tape Library and TL4000 Tap e Library User's Guide