Dell TL2000 manual Configure Library Network

a77ug074

Figure 5-38. Configure Library: Network page

2.Select a Protocol Stack - Choose IPv4 only, IPv6 only, or Dual Stack IPv4 & IPv6.

Note: When changes are made, the following Warning message will appear when the Submit button is clicked.

a77ug171

Figure 5-39. Warning screen

The library must be rebooted or the changes will not take place.

3.Enter IPv4 settings (if applicable).

a.DHCP Address - Click this item ON to have the IP Address of your library automatically set by the library host computer. Leave unchecked and enter the appropriate information for the IP Address, Network Mask, and Gateway Address.

b.IP Address - An identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the IP address of the destination. The format of an IP address is a 32-bit numeric

Chapter 5. Operations 5-45