Table
Error Code | Description | User Action | |
|
|
| |
50 | SCSI: cartridge belongs to another |
| |
| partition | Check application software. | |
|
| ||
54 | SCSI: failure in LME interface | ||
| |||
|
|
| |
55 | SCSI: invalid license key entered |
| |
|
|
| |
58 | Recovered Error: SCSI parity error | Command successful after retries. | |
|
| ||
59 | Recovered Error: Error log overflow | ||
| |||
|
|
| |
60 | Cleaning tape installed | Complete the cleaning process and retry the operation. | |
|
|
| |
61 | Cleaning failure Cleaning process could | Check cleaning tape and exchange if necessary. Retry | |
| not be performed | operation | |
|
|
| |
62 | Cleaning tape expired | Exchange cleaning tape | |
|
|
| |
63 | Invalid cartridge Drive has rejected the | Check cartridge regarding tape and drive technology and | |
| data tape as invalid | retry operation. After further occurrence exchange data | |
|
| cartridge. | |
|
|
| |
64 | Invalid cleaning cartridge Drive has | Check cleaning cartridge and retry operation. After further | |
| rejected the cleaning tape as invalid | occurrence exchange cleaning tape. | |
|
|
| |
65 | Invalid upgrade cartridge Drive has | Retry operation, after further occurrence contact technical | |
| rejected the upgrade tape as invalid | support for new upgrade tape | |
|
|
| |
70 | Currently not used |
| |
|
|
| |
71 | Currently not used |
| |
|
|
| |
72 | Currently not used |
| |
|
|
| |
73 | SCSI: overlapped command attempt | Check the application software. | |
|
| ||
74 | SCSI: echo buffer overwritten | ||
| |||
|
|
| |
80 | Bar code reader Error, cannot initialize |
| |
| BCR |
| |
|
|
| |
81 | Bar code reader Error, no response from |
| |
| BCR |
| |
|
|
| |
82 | EEPROM (Electrically Erasable |
| |
| Programmable |
| |
| Error, no response from EEPROM |
| |
| (located on accessor controller) |
| |
|
|
| |
83 | Accessor controller generic problem | Contact technical support. | |
|
| ||
84 | Setting of gripper motor parameters |
| |
| failed |
| |
|
|
| |
85 | Setting of slider motor parameters failed |
| |
|
|
| |
86 | Setting of elevator motor parameters |
| |
| failed |
| |
|
|
| |
87 | Setting of rotation motor parameters |
| |
| failed |
| |
|
|
| |
88 | Setting of sled motor parameters failed |
| |
|
|
|
Chapter 8. Error Codes