
Table
Number | Item | Description | |
|
|
| |
| Right cartridge | v In a 2U library, the right magazine can hold up to 12 cartridges. | |
| magazine(s) | v In a 4U library, the right magazines can hold up to 24 cartridges. | |
|
| ||
| Left cartridge | v In a 2U library, the left magazine can hold up to 11 cartridges and houses | |
| magazine(s) |
| the elective |
|
|
| |
|
| v In a 4U library, the left magazines can hold up to 21 cartridges and houses | |
|
|
| the elective |
|
|
| |
| Accessor | This component contains the library robot and bar code reader. The accessor | |
|
| moves cartridges to/from the following: | |
|
| v | I/O Station |
|
| v | storage slots |
|
| v | tape drive(s) |
| Library Controller Card | This component is a customer replaceable unit (CRU) and stores the user | |
|
| configuration information or vital product data (VPD). | |
|
|
| |
| Tape drive sled | Both libraries support the Ultrium 3 and Ultrium 4 Tape Drive. Each tape | |
|
| drive in the library is packaged in a container called a drive sled. The drive | |
|
| sled is a customer replaceable unit (CRU), and is designed for easy removal | |
|
| and replacement. | |
|
| v The 2U library houses one full height tape drive sled or up to two half | |
|
|
| height tape drive sleds. |
|
| v The 4U library houses up to two full height tape drive sleds or up to four | |
|
|
| half height tape drive sleds. Combinations of full height and half height |
|
|
| drive sleds are allowed. |
|
|
| |
| Power supply | The power supply is a customer replaceable unit (CRU) and the sole source of | |
|
| power for the library. The 2U has one power supply. The 4U has one or can | |
|
| have an optional second power supply for redundancy. | |
|
|
|
|
Bar Code Reader
The bar code reader is an integral part of the library accessor. The bar code reader provides inventory feedback to the host application, Operator Control Panel display, and Web User Interface by reading cartridge bar code labels. The library stores the customized inventory data in memory.
Library firmware supports a 6 or 8 character volume serial number (VOLSER) on the bar code label on the tape cartridge. Bar code selection is available for libraries with library code 4.50 or greater.
Encryption
The LTO Ultrium 4 Tape Drive supports Application Managed Encryption (AME), and Library Managed Encryption (LME), using T10 encryption methods, for SAS and Fibre Channel drives only. Data encryption is supported with LTO Ultrium 4 Data Cartridges only. Encryption is also supported with library firmware version 5.80 and higher and drive firmware version 77BE and greater.
The encryption enabled drive contains the necessary hardware and firmware to encrypt and decrypt host tape application data. Encryption policy and encryption keys are provided by the host application or host server. A drive digital certificate