Dell TL2000 Manage Library Menu, Configure Library Restore Defaults, Manage Library Move Media

Note: The TL2000/TL400 email address field cannot be empty (clear). The email notification setup allows the user to turn off the feature by deselecting the notify error and notify warnings boxes. The user can add an invalid email as long as the email address format is correct (i.e. a@xxx.xxx).

E-mail Domain

Enter the email domain name of the individual you would like to receive the errors and/or warnings.

SMTP Server Address

Enter the address of the email server of the individual you would like to receive the errors and/or warnings.

Configure Library: Restore Defaults

This page allows the user to reset the configuration to the factory defaults.

Note: The user must restore factory defaults when library drive configurations are changed from a LTO full height to half height configuration in order for the library to operate properly. If just adding a new drive to the configuration the restore factory default is not required - only a power cycle of the library.

a77ug079

Figure 5-44. Configure Library: Restore Defaults page

Manage Library Menu

Manage Library: Move Media

This page allows the user to move tape cartridges within the library. The source and destination are selected and then the MOVE button in the center of the screen is clicked to activate the move.

a77ug072

Figure 5-45. Manage Library: Move Media page

The following elements appear in the Source and Destination screens.

Chapter 5. Operations 5-49