Dell TL2000 manual Configure Menu, Control Re-Inventory, Configure Logical Libraries

Choose ″Left″ or ″Right″ to unlock the corresponding cartridge magazine(s). The magazines can now be removed from the library by gently pulling each magazine out of the library. To replace a magazine, insert the back of the magazine into the front of the library and gently push the magazine into the library. The magazine will lock when inserted into the library.

If the magazines are not pulled out of the library within 15 seconds after they are unlocked, the command will cancel and you will have to repeat the process to unlock the magazines.

Control: Re-Inventory

Use this menu item to initiate a scan of the cartridges currently in the library.

Control

Re-Inventory

Figure 5-11. Control: Re-Inventory menu

a77ug055

Note: It may take up to five minutes to complete the library inventory.

Configure Menu

The Configure Menu is used during the initial setup of your library and when changes need to be made to your library’s configuration. This menu contains the following items:

vLogical Libraries

vLibrary Settings

vDrive

vNetwork

vSet Access PIN

vSet Date and Time

vPath Failover

vRestore Defaults

Configure: Logical Libraries

Use this menu item to select the number of logical libraries.

5-18Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide