Entering User Access Information using the Web User Interface
This function, other than the Access PIN, is not available on the Operator Control
Panel.
1. Click User Access in the left navigation pane.
2. Choose a Role.

v User

v Superuser

v Admin

v Service

Note: Only one password can be set for each Role.

3. Enter the New Password . The password has a maximum of 10 characters (A-Z,
a-z, 0-9, @, <hyphen>, <space>, <period>).
4. In Repeat Password, enter the new password again.
5. In Support Name, enter the name of the person that will be able to offer the
user help with the library.

Note: Only one support person can be configured for the entire tape library.

The support person may or may not be one of the user, superuser, or
admin account holders.
6. In Support Phone, enter the phone number of the person that will be able to
offer the user help with the library.
7. In Support Email, enter the email address of the person that will be able to
offer the user help with the library.
8. Click one of the following:

v Refresh - to update the current screen.

v Submit - to apply the changes made to the screen.

Entering Date and Time using the Web User Interface
1. Click Date & Time in the left navigation pane.
a77ug082
Figure 4-29. The Configure Library: User Access screen
4-26 Dell PowerVault TL2000 Tape Library and TL4000 Tap e Library User's Guide